Search by vehicle
Search by KBA
Search by engine
ALFA ROMEO 552 68 532
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
ALFA ROMEO 552 68 532
Choose a car by KBA.
ALFA ROMEO 552 68 532
Choose an engine.
View search
Hide search
Spare parts ALFA ROMEO 552 68 532
General information
| Code: | 489.990 |
| Brand: | ELRING |
| Title: | Gasket, EGR valve |
| Car: | MAN |
Criteria
| Inner Diameter [mm]: | 35 mm |
| Number of mounting bores: | 2 |
| Mounting points diameter [mm]: | 9 mm |
| Thickness [mm]: | 0,25 mm |
| Goods tariff number: | 8409999990 |
Show all
Show less
Netto price:
USD $3.24
(USD $3.24 without VAT 0%)
Your price:
-25%
USD $2.43
(USD $2.43 without VAT 0%)
| Warehouse: | 6 pcs |
General information
| Code: | 687.330 |
| Brand: | ELRING |
| Title: | Cylinder Head Bolt Set |
| Car: | PEUGEOT |
Criteria
| Thread Size: | M12x1,25x219 |
| Bolt Head-/Nut Design: | Female Splined (Ribe-CV®) |
| Spanner Size: | CV - M 14 |
| Number of bolts/screws: | 10 |
| Goods tariff number: | 7318158066 |
Show all
Show less
Netto price:
USD $33.05
(USD $33.05 without VAT 0%)
Your price:
-25%
USD $24.79
(USD $24.79 without VAT 0%)
| Warehouse: | 2 pcs |
General information
| Code: | PI 06-0019 |
| Brand: | FRECCIA |
| Title: | Tappet |
| Car: | FIAT |
Criteria
| Fitting Position: | Exhaust Side |
| Fitting Position: | Intake Side |
| Height [mm]: | 34,7 mm |
| Diameter [mm]: | 12 mm |
| Operating Mode: | hydraulic |
Show all
Show less
Netto price:
USD $6.43
(USD $6.43 without VAT 0%)
Your price:
-30%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs | |
| Supplier: | > 25 pcs |
General information
| Code: | 7.05194.26.0 |
| Brand: | PIERBURG |
| Title: | Cooler, exhaust gas recirculation |
| Car: | ALFA ROMEO |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12 V |
| Supplementary Article/Supplementary Info: | with gasket/seal |
Show all
Show less
General information
| Code: | 7.05373.04.0 |
| Brand: | PIERBURG |
| Title: | Oil Pressure Valve |
Criteria
| Operating Mode: | Electric-hydraulic |
| Voltage [V]: | 12 V |
| Fitting Position: | Oil Pump |
Show all
Show less
General information
| Code: | 7.07381.02.0 |
| Brand: | PIERBURG |
| Title: | Oil Pump |
| Car: | FIAT |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Supplementary Article/Supplementary Info: | with electrical oil pressure valve |
| Supplementary Article/Supplementary Info 2: | with shaft seal |
| Length [mm]: | 219,6 mm |
Show all
Show less
General information
| Code: | 7.11020.70.0 |
| Brand: | PIERBURG |
| Title: | Sensor, exhaust gas temperature |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 5 V |
| Conductor Number: | 2 conductor |
| Cable Length [mm]: | 196 mm |
| Thread Size: | M14 x 1,5 |
| Total Length [mm]: | 284 mm |
Show all
Show less
General information
| Code: | 7.11190.03.0 |
| Brand: | PIERBURG |
| Title: | Sensor, exhaust pressure |
Criteria
| Sensor Type: | Exhaust gas back pressure sensor |
| Output Voltage, up to [V]: | 5 V |
| Measuring Range to [kPa]: | 90 kPa |
| Number of pins: | 3 -pin connector |
| Number of mounting bores: | 1 |
| Supplementary Article/Supplementary Info: | without accessories |
| Fitting Position: | Soot Particulate Filter |
Show all
Show less
General information
| Code: | FE101956 |
| Brand: | FEBI BILSTEIN |
| Title: | Alternator Freewheel Clutch |
| Car: | FIAT |
Criteria
| Width [mm]: | 41 mm |
| Inner Diameter [mm]: | 17 mm |
| Outer Diameter [mm]: | 54 mm |
| Tightening Torque [Nm]: | 85 Nm |
| Number of ribs: | 6 |
| For OE number: | 55244937 |
| Supplementary Article/Supplementary Info 2: | with cover |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE102792 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | PEUGEOT |
Criteria
| Thickness [mm]: | 2 mm |
| Inner Diameter [mm]: | 7,7 mm |
| Outer Diameter [mm]: | 15 mm |
| Material: | Copper |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less