Search by vehicle
Search by KBA
Search by engine
HYUNDAI G4EP
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
HYUNDAI G4EP
Choose a car by KBA.
HYUNDAI G4EP
Choose an engine.
View search
Hide search
Spare parts HYUNDAI G4EP
General information
| Code: | 50013146 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | HONDA |
Criteria
| Filter type: | Spin-on Filter |
| Outer Diameter 1 [mm]: | 80 mm |
| Inner Diameter 1 [mm]: | 56 mm |
| Outer Diameter 2 [mm]: | 63 mm |
| Thread Size: | M20 x 1,5 |
| Height [mm]: | 79 mm |
| Bypass Valve Opening Pressure [bar]: | 1,2 bar |
| Supplementary Article/Supplementary Info 2: | with one anti-return valve |
Show all
Show less
General information
| Code: | FE193871 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | HYUNDAI |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 80 mm |
| Outer Diameter [mm]: | 80 mm |
| Internal Thread Size: | M20 x 1,5 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE21787 |
| Brand: | FEBI BILSTEIN |
| Title: | Deflection Pulley/Guide Pulley, timing belt |
| Car: | MITSUBISHI |
Criteria
| Width of castor bearing surface [mm]: | 32 mm |
| Width [mm]: | 39,5 mm |
| Inner Diameter [mm]: | 10 mm |
| Outer Diameter [mm]: | 60 mm |
| Material: | Metal |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE26626 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt |
| Car: | KIA |
Criteria
| Width [mm]: | 29 mm |
| Material: | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of Teeth: | 153 |
| Surface: | Coated |
| Belts: | with rounded tooth profile |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE26735 |
| Brand: | FEBI BILSTEIN |
| Title: | Tensioner Pulley, timing belt |
| Car: | HYUNDAI |
Criteria
| Width of castor bearing surface [mm]: | 32,5 mm |
| Outer Diameter [mm]: | 60 mm |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE27395 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt |
| Car: | MITSUBISHI |
Criteria
| Width [mm]: | 12,7 mm |
| Number of Teeth: | 65 |
| Belts: | with rounded tooth profile |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE30180 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MITSUBISHI |
Criteria
| Length [mm]: | 22 mm |
| Outer Diameter [mm]: | 23 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 11 mm |
| Quality/ Grade: | 5.8 |
| Spanner Size: | 17 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 11 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE48885 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MITSUBISHI |
Criteria
| Length [mm]: | 22 mm |
| Outer Diameter [mm]: | 23 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 11 mm |
| Quality/ Grade: | 5.8 |
| Spanner Size: | 17 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 11 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE28796 |
| Brand: | FEBI BILSTEIN |
| Title: | V-ribbed Belt |
Criteria
| Length [mm]: | 963 mm |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs: | 4 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE48746 |
| Brand: | FEBI BILSTEIN |
| Title: | Tappet |
| Car: | MITSUBISHI |
Criteria
| Thickness [mm]: | 25,73 mm |
| Outer Diameter [mm]: | 12,96 mm |
| Operating Mode: | hydraulic |
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less