Search by vehicle
Search by KBA
Search by engine
MAZDA WLE9
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA WLE9
Choose a car by KBA.
MAZDA WLE9
Choose an engine.
View search
Hide search
Spare parts MAZDA WLE9
General information
| Code: | 036.164 |
| Brand: | ELRING |
| Title: | Sealing compound - Dirko - Grey, 70ml |
| Tag: | Dirko HT |
| Car: | ŠKODA-VW |
Criteria
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | UV resistant |
| Container Type: | Tube |
| Capacity [ml]: | 70 ml |
| Material: | Silicone |
| Temperature range from [°C]: | -60 °C |
| Temperature range to [°C]: | 315 °C |
Show all
Show less
Netto price:
USD $6.00
(USD $6.00 without VAT 0%)
Your price:
-25%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | RA06-1010 |
| Brand: | FRECCIA |
| Title: | Rocker arm, engine timing |
| Car: | MAZDA |
Netto price:
USD $9.38
(USD $9.38 without VAT 0%)
Your price:
-30%
USD $6.57
(USD $6.57 without VAT 0%)
price per 1 pcs
| Warehouse: | 4 pcs | |
| Supplier: | > 25 pcs |
Packs of 8 pcs · opened pack in stock
General information
| Code: | 50013854 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | MITSUBISHI |
Criteria
| Filter type: | Spin-on Filter |
| Outer Diameter 1 [mm]: | 95 mm |
| Inner Diameter 1 [mm]: | 62 mm |
| Thread Size: | M26x1,5 |
| Height [mm]: | 140 mm |
| Bypass Valve Opening Pressure [bar]: | 1,2 bar |
| Supplementary Article/Supplementary Info 2: | with one anti-return valve |
Show all
Show less
General information
| Code: | FE180282 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MAZDA |
Criteria
| Length [mm]: | 18 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 10 mm |
| Spanner Size: | 19 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 10 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE186641 |
| Brand: | FEBI BILSTEIN |
| Title: | Alternator |
| Car: | MAZDA |
Criteria
| Voltage [V]: | 12 V |
| Alternator Charging Current [A]: | 70 A |
| Belt Pulley Ø [mm]: | 86 mm |
| Number of ribs: | 2 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE186646 |
| Brand: | FEBI BILSTEIN |
| Title: | Starter |
| Car: | FORD |
Criteria
| Voltage [V]: | 12 V |
| Number of Teeth: | 10 |
| Rated Power [kW]: | 2,2 kW |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE192755 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt Kit |
| Car: | MAZDA |
Criteria
| Width of castor bearing surface [mm]: | 30 mm |
| Number of Teeth: | 101 |
| Surface: | PTFE (Polytetrafluorethylene) coated |
| Belts: | with rounded tooth profile |
| Units/Pulleys: | incl. tensioner pulley |
| Belt Material: | HNBR (hydrogenated nitrile butadiene rubber) |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194288 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | HYUNDAI |
Criteria
| Inner Diameter [mm]: | 14,4 mm |
| Height [mm]: | 2 mm |
| Outer Diameter [mm]: | 22 mm |
| Material: | Aluminium |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE197893 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | FORD |
Criteria
| Length [mm]: | 18 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 10 mm |
| Quality/ Grade: | 6.8 |
| Spanner Size: | 19 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 10 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | R6424/SNT |
| Brand: | FRECCIA |
| Title: | Intake Valve |
| Car: | MAZDA |
Criteria
| Supplementary Article/Supplementary Info 2: | Nitrided valve stem |
| Length [mm]: | 111,9 mm |
| Valve Stem Diameter [mm]: | 7 mm |
| Valve Head Diameter [mm]: | 32,7 mm |
| Material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 45 ° |
| Connector type: | EE |
Show all
Show less