Search by vehicle
Search by KBA
Search by engine
MAZDA FP01LP
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA FP01LP
Choose a car by KBA.
MAZDA FP01LP
Choose an engine.
View search
Hide search
Spare parts MAZDA FP01LP
General information
| Code: | 036.164 |
| Brand: | ELRING |
| Title: | Sealing compound - Dirko - Grey, 70ml |
| Tag: | Dirko HT |
| Car: | ŠKODA-VW |
Criteria
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | UV resistant |
| Container Type: | Tube |
| Capacity [ml]: | 70 ml |
| Material: | Silicone |
| Temperature range from [°C]: | -60 °C |
| Temperature range to [°C]: | 315 °C |
Show all
Show less
Netto price:
USD $6.00
(USD $6.00 without VAT 0%)
Your price:
-25%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 707.180 |
| Brand: | ELRING |
| Title: | Seal Ring, valve stem |
| Car: | MAZDA |
Criteria
| Valve Stem Diameter [mm]: | 6 mm |
| Inner Diameter [mm]: | 10,8 mm |
| Outer Diameter [mm]: | 13,6 mm |
| Height [mm]: | 10,3 mm |
| Material: | FPM (fluoride rubber) |
| Colour: | green |
| Goods tariff number: | 8484200000 |
Show all
Show less
Netto price:
USD $1.00
(USD $1.00 without VAT 0%)
Your price:
-25%
USD $0.75
(USD $0.75 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 50013851 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | SUBARU |
Criteria
| Filter type: | Spin-on Filter |
| Thread Size: | M20 x 1,5 |
| Height [mm]: | 71 mm |
Show all
Show less
General information
| Code: | FE106963 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | MAZDA |
Criteria
| Width [mm]: | 6 mm |
| Inner Diameter [mm]: | 42,5 mm |
| Outer Diameter [mm]: | 54,5 mm |
| Rotation Direction: | Clockwise rotation |
| Material: | MVQ (silicone rubber) |
| Fitting Position: | frontal sided |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE107707 |
| Brand: | FEBI BILSTEIN |
| Title: | Thermostat, coolant |
| Car: | MAZDA |
Criteria
| Opening Temperature [°C]: | 82 °C |
| Outer Diameter [mm]: | 52 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE13427 |
| Brand: | FEBI BILSTEIN |
| Title: | Spark Plug |
| Tag: | Super |
| Car: | MAZDA |
Criteria
| Contains article number: | 13425 |
| External Thread Size: | M14 x 1,25 |
| Thread Length [mm]: | 19 mm |
| Spanner Size: | 16 |
| Electrode Gap [mm]: | 1,1 mm |
| Spark Plug: | with gasket seat |
| Spark Plug: | 1 - Earthed Electrode |
| Recommended change interval [km]: | 30000 km |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE13606 |
| Brand: | FEBI BILSTEIN |
| Title: | Spark Plug |
| Car: | FORD |
Criteria
| Contains article number: | 13604 |
| External Thread Size: | M14 x 1,25 |
| Thread Length [mm]: | 19 mm |
| Spanner Size: | 16 |
| Electrode Gap [mm]: | 1,1 mm |
| Spark Plug: | with gasket seat |
| Spark Plug: | 1 - Earthed Electrode |
| Recommended change interval [km]: | 90000 km |
| Spark Plug: | Platinum Middle Electrode |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE175776 |
| Brand: | FEBI BILSTEIN |
| Title: | Oxygen Sensor |
| Car: | KIA |
Criteria
| Oxygen Sensor: | Heated |
| External Thread Size: | M18 x 1,5 |
| Spanner Size: | 22 |
| Number of circuits: | 4 |
| Cable Length [mm]: | 500 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE17633 |
| Brand: | FEBI BILSTEIN |
| Title: | Tappet |
| Car: | MAZDA |
Criteria
| Thickness [mm]: | 24 mm |
| Outer Diameter [mm]: | 30 mm |
| Operating Mode: | hydraulic |
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE180282 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MAZDA |
Criteria
| Length [mm]: | 18 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 10 mm |
| Spanner Size: | 19 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 10 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less