Search by vehicle
Search by KBA
Search by engine
MAZDA B67J
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA B67J
Choose a car by KBA.
MAZDA B67J
Choose an engine.
View search
Hide search
Spare parts MAZDA B67J
General information
| Code: | 706.881 |
| Brand: | ELRING |
| Title: | Gasket, cylinder head |
| Car: | MAZDA |
Criteria
| Diameter [mm]: | 79,5 mm |
| Gasket/Seal Design: | Fibre Composite |
| Additionally required articles (article numbers): | 707.630 |
| Goods tariff number: | 8409919990 |
Show all
Show less
Netto price:
USD $18.10
(USD $18.10 without VAT 0%)
Your price:
-43%
USD $10.33
(USD $10.33 without VAT 0%)
| Warehouse: | 1 pcs |
General information
| Code: | 707.180 |
| Brand: | ELRING |
| Title: | Seal Ring, valve stem |
| Car: | MAZDA |
Criteria
| Valve Stem Diameter [mm]: | 6 mm |
| Inner Diameter [mm]: | 10,8 mm |
| Outer Diameter [mm]: | 13,6 mm |
| Height [mm]: | 10,3 mm |
| Material: | FPM (fluoride rubber) |
| Colour: | green |
| Goods tariff number: | 8484200000 |
Show all
Show less
Netto price:
USD $1.00
(USD $1.00 without VAT 0%)
Your price:
-25%
USD $0.75
(USD $0.75 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 50013851 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | SUBARU |
Criteria
| Filter type: | Spin-on Filter |
| Thread Size: | M20 x 1,5 |
| Height [mm]: | 71 mm |
Show all
Show less
General information
| Code: | FE13427 |
| Brand: | FEBI BILSTEIN |
| Title: | Spark Plug |
| Tag: | Super |
| Car: | MAZDA |
Criteria
| Contains article number: | 13425 |
| External Thread Size: | M14 x 1,25 |
| Thread Length [mm]: | 19 mm |
| Spanner Size: | 16 |
| Electrode Gap [mm]: | 1,1 mm |
| Spark Plug: | with gasket seat |
| Spark Plug: | 1 - Earthed Electrode |
| Recommended change interval [km]: | 30000 km |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE13606 |
| Brand: | FEBI BILSTEIN |
| Title: | Spark Plug |
| Car: | FORD |
Criteria
| Contains article number: | 13604 |
| External Thread Size: | M14 x 1,25 |
| Thread Length [mm]: | 19 mm |
| Spanner Size: | 16 |
| Electrode Gap [mm]: | 1,1 mm |
| Spark Plug: | with gasket seat |
| Spark Plug: | 1 - Earthed Electrode |
| Recommended change interval [km]: | 90000 km |
| Spark Plug: | Platinum Middle Electrode |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE15469 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | MAZDA |
Criteria
| Housing material: | Cast Aluminium |
| Water pump impeller material: | Metal |
| Seal Material: | Paper |
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE17493 |
| Brand: | FEBI BILSTEIN |
| Title: | Tensioner Pulley, timing belt |
| Car: | MAZDA |
Criteria
| Width of castor bearing surface [mm]: | 25 mm |
| Outer Diameter [mm]: | 52 mm |
| For OE number: | B630-12-700E |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE17633 |
| Brand: | FEBI BILSTEIN |
| Title: | Tappet |
| Car: | MAZDA |
Criteria
| Thickness [mm]: | 24 mm |
| Outer Diameter [mm]: | 30 mm |
| Operating Mode: | hydraulic |
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE177435 |
| Brand: | FEBI BILSTEIN |
| Title: | Oxygen Sensor |
| Car: | KIA |
Criteria
| Oxygen Sensor: | Heated |
| Oxygen Sensor: | Regulating Sensor |
| External Thread Size: | M18 x 1,5 |
| Spanner Size: | 22 |
| Number of circuits: | 1 |
| Cable Length [mm]: | 470 mm |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE180282 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MAZDA |
Criteria
| Length [mm]: | 18 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 10 mm |
| Spanner Size: | 19 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 10 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less