Search by vehicle
Search by KBA
Search by engine
MAZDA PE-VPS
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA PE-VPS
Choose a car by KBA.
MAZDA PE-VPS
Choose an engine.
View search
Hide search
Spare parts MAZDA PE-VPS
General information
| Code: | 41986600 |
| Brand: | KOLBENSCHMIDT |
| Title: | Piston with rings and pin |
| Car: | Mazda 3 PEY2 Euro6 2011+ |
Criteria
| Production Number: | 083146 |
| Cylinder Bore [mm]: | 83,5 mm |
| Piston Clearance [mm]: | 0,03 mm |
| Compression Height [mm]: | 34 mm |
| Length [mm]: | 54,5 mm |
| Recess Depth 1 [mm]: | 8,7 mm |
| Valve Pocket Depth 1 [mm]: | 1 mm |
| Recess Diameter [mm]: | 23 mm |
| Component Number: | 66930 |
| Component Number: | 66931 |
| Component Number: | 66932 |
| Bolt Head Diameter [mm]: | 21 mm |
| Bolt Length [mm]: | 45 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
General information
| Code: | FE100094 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Tensioner, V-ribbed belt |
| Car: | MAZDA |
Criteria
| Width of castor bearing surface [mm]: | 26 mm |
| Housing material: | Aluminium |
| Track rollers material: | Plastic |
| Outer Diameter [mm]: | 65 mm |
| Operating Mode: | Automatic |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE107668 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | MAZDA |
Criteria
| Width [mm]: | 6 mm |
| Inner Diameter [mm]: | 37 mm |
| Outer Diameter [mm]: | 50 mm |
| Rotation Direction: | Clockwise rotation |
| Material: | MVQ (silicone rubber) |
| Fitting Position: | frontal sided |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE14098 |
| Brand: | FEBI BILSTEIN |
| Title: | Pilot Bearing, clutch |
| Car: | ŠKODA-VW |
Criteria
| Width [mm]: | 15 mm |
| Inner Diameter [mm]: | 15,4 mm |
| Outer Diameter [mm]: | 21 mm |
| Bearing Type: | Needle Bearing |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less

