Search by vehicle
Search by KBA
Search by engine
MAZDA P5-VPS
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA P5-VPS
Choose a car by KBA.
MAZDA P5-VPS
Choose an engine.
View search
Hide search
Spare parts MAZDA P5-VPS
General information
| Code: | FE14098 |
| Brand: | FEBI BILSTEIN |
| Title: | Pilot Bearing, clutch |
| Car: | ŠKODA-VW |
Criteria
| Width [mm]: | 15 mm |
| Inner Diameter [mm]: | 15,4 mm |
| Outer Diameter [mm]: | 21 mm |
| Bearing Type: | Needle Bearing |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE175830 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, camshaft position |
| Car: | MAZDA |
Criteria
| Number of connectors: | 3 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE177117 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, crankshaft pulse |
| Car: | MAZDA |
Criteria
| Number of connectors: | 3 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE186633 |
| Brand: | FEBI BILSTEIN |
| Title: | Ignition Coil |
| Car: | MAZDA |
Criteria
| Number of connectors: | 4 |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE188389 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | MAZDA |
Criteria
| Housing material: | Aluminium |
| Water pump impeller material: | Plastic |
| Seal Material: | Rubber |
| Number of blades/vanes: | 7 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE193872 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | HONDA |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 67 mm |
| Outer Diameter [mm]: | 68 mm |
| Internal Thread Size: | M20 x 1,5 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE193882 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | KIA |
Criteria
| Length [mm]: | 27 mm |
| Outer Diameter [mm]: | 23 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 17 mm |
| Spanner Size: | 17 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zink flake coated |
| Screw length below head [mm]: | 17 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194283 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MAZDA |
Criteria
| Length [mm]: | 19 mm |
| Outer Diameter [mm]: | 21 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 12 mm |
| Spanner Size: | 8 |
| Bolt Head-/Nut Design: | Hexagon Socket |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 16 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194286 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MAZDA |
Criteria
| Length [mm]: | 19 mm |
| Outer Diameter [mm]: | 21 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 12 mm |
| Spanner Size: | 8 |
| Bolt Head-/Nut Design: | Hexagon Socket |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 16 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194288 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | HYUNDAI |
Criteria
| Inner Diameter [mm]: | 14,4 mm |
| Height [mm]: | 2 mm |
| Outer Diameter [mm]: | 22 mm |
| Material: | Aluminium |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less