Search by vehicle
Search by KBA
Search by engine
MAZDA PEX2
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA PEX2
Choose a car by KBA.
MAZDA PEX2
Choose an engine.
View search
Hide search
Spare parts MAZDA PEX2
General information
| Code: | 7.50086.03.0 |
| Brand: | PIERBURG |
| Title: | Tappet, high-pressure pump |
Criteria
| Outer Diameter [mm]: | 26 mm |
| Height [mm]: | 29,4 mm |
General information
| Code: | FE100094 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Tensioner, V-ribbed belt |
| Car: | MAZDA |
Criteria
| Width of castor bearing surface [mm]: | 26 mm |
| Housing material: | Aluminium |
| Track rollers material: | Plastic |
| Outer Diameter [mm]: | 65 mm |
| Operating Mode: | Automatic |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE14098 |
| Brand: | FEBI BILSTEIN |
| Title: | Pilot Bearing, clutch |
| Car: | ŠKODA-VW |
Criteria
| Width [mm]: | 15 mm |
| Inner Diameter [mm]: | 15,4 mm |
| Outer Diameter [mm]: | 21 mm |
| Bearing Type: | Needle Bearing |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE175830 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, camshaft position |
| Car: | MAZDA |
Criteria
| Number of connectors: | 3 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE176704 |
| Brand: | FEBI BILSTEIN |
| Title: | V-ribbed Belt |
Criteria
| Length [mm]: | 963 mm |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs: | 6 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE177117 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, crankshaft pulse |
| Car: | MAZDA |
Criteria
| Number of connectors: | 3 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE186633 |
| Brand: | FEBI BILSTEIN |
| Title: | Ignition Coil |
| Car: | MAZDA |
Criteria
| Number of connectors: | 4 |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE188389 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | MAZDA |
Criteria
| Housing material: | Aluminium |
| Water pump impeller material: | Plastic |
| Seal Material: | Rubber |
| Number of blades/vanes: | 7 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE193872 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | HONDA |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 67 mm |
| Outer Diameter [mm]: | 68 mm |
| Internal Thread Size: | M20 x 1,5 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE193882 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | KIA |
Criteria
| Length [mm]: | 27 mm |
| Outer Diameter [mm]: | 23 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 17 mm |
| Spanner Size: | 17 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zink flake coated |
| Screw length below head [mm]: | 17 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less