Search by vehicle
Search by KBA
Search by engine
HONDA R20A
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
HONDA R20A
Choose a car by KBA.
HONDA R20A
Choose an engine.
View search
Hide search
Spare parts HONDA R20A
General information
| Code: | 036.164 |
| Brand: | ELRING |
| Title: | Sealing compound - Dirko - Grey, 70ml |
| Tag: | Dirko HT |
| Car: | ŠKODA-VW |
Criteria
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | UV resistant |
| Container Type: | Tube |
| Capacity [ml]: | 70 ml |
| Material: | Silicone |
| Temperature range from [°C]: | -60 °C |
| Temperature range to [°C]: | 315 °C |
Show all
Show less
Netto price:
USD $6.00
(USD $6.00 without VAT 0%)
Your price:
-25%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 130.560 |
| Brand: | ELRING |
| Title: | Seal Ring, valve stem |
| Car: | HONDA |
Criteria
| Colour: | green |
| Valve Stem Diameter [mm]: | 5,5 mm |
| Inner Diameter [mm]: | 11 mm |
| Outer Diameter [mm]: | 13 mm |
| Height [mm]: | 10 mm |
| Material: | FPM (fluoride rubber) |
Show all
Show less
Netto price:
USD $1.29
(USD $1.29 without VAT 0%)
Your price:
-25%
USD $0.97
(USD $0.97 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 590.797 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | OPEL |
Criteria
| Inner Diameter [mm]: | 80 mm |
| Outer Diameter [mm]: | 98 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | A/BS |
| Swirl Type: | Left-hand Twist |
| Material: | FPM (fluoride rubber) |
| Dust Cover: | with dust lip |
| Goods tariff number: | 8484200000 |
Show all
Show less
Netto price:
USD $5.33
(USD $5.33 without VAT 0%)
Your price:
-25%
USD $4.00
(USD $4.00 without VAT 0%)
| Warehouse: | 1 pcs |
General information
| Code: | FE106455 |
| Brand: | FEBI BILSTEIN |
| Title: | Mass Air Flow Sensor |
| Car: | HONDA |
Criteria
| Resistor Type: | Hot-wire Sensor |
| Number of connectors: | 5 |
| Housing Type: | without housing |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE107196 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Pulley, crankshaft |
| Car: | HONDA |
Criteria
| Inner Diameter [mm]: | 30 mm |
| Outer Diameter [mm]: | 157 mm |
| Number of ribs: | 6 |
| Parameter: | 7PK |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE108173 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Chain Kit |
| Tag: | Standard Medium Kit |
| Car: | HONDA |
Criteria
| Chain Type: | Silent Chain |
| Number of chain links: | 136 |
| Chain Type: | Closed chain |
| Chain pitch [mm]: | 6,35 mm |
| Supplementary Article/Supplementary Info: | with chain tensioner |
| Supplementary Article/Supplementary Info: | with slide rails |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE108236 |
| Brand: | FEBI BILSTEIN |
| Title: | Ignition Coil |
| Car: | HONDA |
Criteria
| Number of connectors: | 3 |
| For OE number: | 30520-RNA-A01 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE172699 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, engine |
| Car: | HONDA |
Criteria
| Fitting Position: | Upper |
| Fitting Position: | Rear |
| Mounting Type: | Rubber-Metal Mount |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE176233 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, crankshaft pulse |
| Car: | HONDA |
Criteria
| Number of connectors: | 3 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE176536 |
| Brand: | FEBI BILSTEIN |
| Title: | Deflection/Guide Pulley, V-ribbed belt |
| Car: | HONDA |
Criteria
| Width of castor bearing surface [mm]: | 21,60 mm |
| Width [mm]: | 27 mm |
| Inner Diameter [mm]: | 17 mm |
| Outer Diameter [mm]: | 80 mm |
| Mounting points diameter [mm]: | 17 mm |
| Material: | Plastic |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less