Search by vehicle
Search by KBA
Search by engine
CHEVROLET LLO
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
CHEVROLET LLO
Choose a car by KBA.
CHEVROLET LLO
Choose an engine.
View search
Hide search
Spare parts CHEVROLET LLO
General information
| Code: | 036.164 |
| Brand: | ELRING |
| Title: | Sealing compound - Dirko - Grey, 70ml |
| Tag: | Dirko HT |
| Car: | ŠKODA-VW |
Criteria
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | UV resistant |
| Container Type: | Tube |
| Capacity [ml]: | 70 ml |
| Material: | Silicone |
| Temperature range from [°C]: | -60 °C |
| Temperature range to [°C]: | 315 °C |
Show all
Show less
Netto price:
USD $6.00
(USD $6.00 without VAT 0%)
Your price:
-25%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 7.07224.02.0 |
| Brand: | PIERBURG |
| Title: | Auxiliary Water Pump (cooling water circuit) |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12,5 V |
| Diameter 1 [mm]: | 21,8 mm |
| Supplementary Article/Supplementary Info 2: | with rubber bellow |
| Supplementary Article/Supplementary Info 2: | with fastening material |
| Water pump impeller material: | Plastic |
| Total Width [mm]: | 143 mm |
| Signal type: | PWM |
Show all
Show less
General information
| Code: | FE106802 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, camshaft position |
| Car: | CHEVROLET |
Criteria
| Length [mm]: | 24 mm |
| Outer Diameter [mm]: | 17,62 mm |
| Number of connectors: | 3 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE174949 |
| Brand: | FEBI BILSTEIN |
| Title: | Thermostat, coolant |
| Car: | CHEVROLET |
Criteria
| Opening Temperature [°C]: | 102 °C |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Housing Type: | with housing |
| Supplementary Article/Supplementary Info: | with temperature sensor |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE188218 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Chain |
| Car: | CHEVROLET |
Criteria
| Chain Type: | Silent Chain |
| Timing Chain Size: | Z46-AMD1 |
| Number of chain links: | 152 |
| Chain Type: | Closed chain |
| Chain pitch [mm]: | 6,35 mm |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE195070 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | CHEVROLET |
Criteria
| Width [mm]: | 6 mm |
| Height [mm]: | 6 mm |
| Inner Diameter [mm]: | 34,6 mm |
| Outer Diameter [mm]: | 50,2 mm |
| Material: | FPM (fluoride rubber) |
| Fitting Position: | frontal sided |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE31999 |
| Brand: | FEBI BILSTEIN |
| Title: | Ignition Coil |
| Car: | CHEVROLET |
Criteria
| Ignition Coil: | 4 Spark |
| Number of connectors: | 3 |
| Colour: | black |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE44442 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | OPEL |
Criteria
| Length [mm]: | 37 mm |
| Outer Diameter [mm]: | 27 mm |
| External Thread Size: | M12 x 1,75 |
| Thread Length [mm]: | 17 mm |
| Quality/ Grade: | 5.8 |
| Spanner Size: | 15 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 25 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less

