Search by vehicle
Search by KBA
Search by engine
SSANGYONG D20DTF
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
SSANGYONG D20DTF
Choose a car by KBA.
SSANGYONG D20DTF
Choose an engine.
View search
Hide search
Spare parts SSANGYONG D20DTF
General information
| Code: | 403.730 |
| Brand: | ELRING |
| Title: | Seal Ring, valve stem |
| Car: | Alpina Aston Martin Bentley BMW Cadilac Chevrolet Chrysler Citroën Dacia Daewoo Dodge Ferrari Fiat Honda Infiniti Irmscher Isuzu Jeep Lancia Land Rover Lotus Masserati Maybach Mercedes Mitsubishi Morgan Nissan Opel Peugeot Puch Renault Saab Smart |
Criteria
| Colour: | green |
| Valve Stem Diameter [mm]: | 6 mm |
| Inner Diameter [mm]: | 8,8 mm |
| Outer Diameter [mm]: | 12,2 mm |
| Height [mm]: | 9,7 mm |
| Material: | FPM (fluoride rubber) |
| Goods tariff number: | 8484200000 |
Show all
Show less
Your price:
USD $0.28
(USD $0.28 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | CR4685SV0.25 |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | SSANGYONG |
Criteria
| Thickness [inch]: | 0,076 Inch |
| Thickness [mm]: | 1,935 mm |
| For shaft diameter from [mm]: | -0,25 mm |
| For shaft diameter from [inch]: | -0,01 Inch |
| For shaft diameter to [mm]: | -0,25 mm |
| For shaft diameter to [inch]: | -0,01 Inch |
| Undersize [mm]: | 0,25 mm |
| For housing diameter up to [mm]: | 54,7 mm |
| For housing diameter up to [inch]: | 2,154 Inch |
| Length [mm]: | 19,94 mm |
| Technical Information: | OE-Replacment version (Silver), 4 pairs |
Show all
Show less
General information
| Code: | CR4685SV0.5 |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | SSANGYONG |
Criteria
| Thickness [inch]: | 0,081 Inch |
| Thickness [mm]: | 2,06 mm |
| For shaft diameter from [mm]: | -0,5 mm |
| For shaft diameter from [inch]: | -0,02 Inch |
| For shaft diameter to [mm]: | -0,5 mm |
| For shaft diameter to [inch]: | -0,02 Inch |
| Undersize [mm]: | 0,5 mm |
| For housing diameter up to [mm]: | 54,7 mm |
| For housing diameter up to [inch]: | 2,154 Inch |
| Length [mm]: | 19,94 mm |
| Technical Information: | OE-Replacment version (Silver), 4 pairs |
Show all
Show less
General information
| Code: | FE05478 |
| Brand: | FEBI BILSTEIN |
| Title: | Deflection/Guide Pulley, V-ribbed belt |
| Car: | MERCEDES |
Criteria
| Width of castor bearing surface [mm]: | 21,5 mm |
| Width [mm]: | 31,5 mm |
| Outer Diameter [mm]: | 64 mm |
| Number of grooves: | 6 |
| Material: | Plastic |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE09672 |
| Brand: | FEBI BILSTEIN |
| Title: | Thermostat, coolant |
| Car: | MERCEDES |
Criteria
| Opening Temperature [°C]: | 85 °C |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE101717 |
| Brand: | FEBI BILSTEIN |
| Title: | Alternator Freewheel Clutch |
| Car: | SSANGYONG |
Criteria
| Width [mm]: | 39,3 mm |
| Inner Diameter [mm]: | 17 mm |
| Outer Diameter [mm]: | 55,7 mm |
| Tightening Torque [Nm]: | 85 Nm |
| Number of ribs: | 6 |
| Supplementary Article/Supplementary Info 2: | with cover |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE173645 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | SSANGYONG |
Criteria
| Housing material: | Grey Cast Iron |
| Water pump impeller material: | Grey Cast Iron |
| Seal Material: | Paper |
| Number of blades/vanes: | 10 |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE198093 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | MAZDA |
Criteria
| Inner Diameter [mm]: | 12,4 mm |
| Outer Diameter [mm]: | 17,8 mm |
| Material: | Copper |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE27540 |
| Brand: | FEBI BILSTEIN |
| Title: | Tappet |
| Car: | PEUGEOT |
Criteria
| Thickness [mm]: | 35 mm |
| Outer Diameter [mm]: | 12 mm |
| Operating Mode: | hydraulic |
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| For OE number: | 0942.89 |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE28956 |
| Brand: | FEBI BILSTEIN |
| Title: | V-ribbed Belt |
Criteria
| Length [mm]: | 1588 mm |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs: | 6 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less