Search by vehicle
Search by KBA
Search by engine
DAEWOO X 20 D1
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
DAEWOO X 20 D1
Choose a car by KBA.
DAEWOO X 20 D1
Choose an engine.
View search
Hide search
Spare parts DAEWOO X 20 D1
General information
| Code: | FE01211 |
| Brand: | FEBI BILSTEIN |
| Title: | Cap, coolant tank |
| Car: | OPEL |
Criteria
| Colour: | yellow |
| Material: | Plastic |
| Opening Pressure [bar]: | 1,4 bar |
| For OE number: | 90 500 007 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE184125 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, injector |
| Car: | BMW |
Criteria
| Thickness [mm]: | 3,5 mm |
| Inner Diameter [mm]: | 7,52 mm |
| Material: | FPM (fluoride rubber) |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | H077/5 STD |
| Brand: | GLYCO |
| Title: | Crankshaft Bearing Shell |
| Car: | OPEL |
Criteria
| Thickness [mm]: | 1,995 mm |
| For bearing clearance from [mm]: | 0,02 mm |
| For bearing clearance up to [mm]: | 0,07 mm |
| For housing diameter from [mm]: | 72 mm |
| For housing diameter up to [mm]: | 72,013 mm |
| For shaft diameter from [mm]: | 67,98 mm |
| For shaft diameter to [mm]: | 67,996 mm |
| Material: | Aluminium |
| Component Number: | 02-3909 |
| Component Number: | 02-3910H |
| Chemical Properties: | Unleaded |
| Standard Size [STD]: | yes |
| Position/Degree: | 1 ° |
| Position/Degree: | 2 ° |
| Position/Degree: | 3 ° |
| Position/Degree: | 4 ° |
| Position/Degree: | 5 ° |
Show all
Show less
General information
| Code: | 81-37186-00 |
| Brand: | VICTOR REINZ |
| Title: | Shaft Seal, crankshaft |
| Car: | FORD |
Criteria
| Material: | FPM (fluoride rubber) |
| Inner Diameter [mm]: | 45 mm |
| Outer Diameter [mm]: | 65 mm |
| Height [mm]: | 7 mm |
| Radial Shaft Seal Design: | A SL |
| Swirl Type: | Right-hand Twist |
Show all
Show less