Search by vehicle
Search by KBA
Search by engine
FORD WEAT
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
FORD WEAT
Choose a car by KBA.
FORD WEAT
Choose an engine.
View search
Hide search
Spare parts FORD WEAT
Netto price:
USD $1.43
(USD $1.43 without VAT 0%)
Your price:
-25%
USD $1.07
(USD $1.07 without VAT 0%)
| Warehouse: | 4 pcs |
General information
| Code: | 036.164 |
| Brand: | ELRING |
| Title: | Sealing compound - Dirko - Grey, 70ml |
| Tag: | Dirko HT |
| Car: | ŠKODA-VW |
Criteria
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | UV resistant |
| Container Type: | Tube |
| Capacity [ml]: | 70 ml |
| Material: | Silicone |
| Temperature range from [°C]: | -60 °C |
| Temperature range to [°C]: | 315 °C |
Show all
Show less
Netto price:
USD $6.00
(USD $6.00 without VAT 0%)
Your price:
-25%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | FE102844 |
| Brand: | FEBI BILSTEIN |
| Title: | EGR Valve |
| Car: | FORD |
Criteria
| Number of connectors: | 3 |
| Operating Mode: | Electric-pneumatic |
| Supplementary Article/Supplementary Info: | without gasket/seal |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE107707 |
| Brand: | FEBI BILSTEIN |
| Title: | Thermostat, coolant |
| Car: | MAZDA |
Criteria
| Opening Temperature [°C]: | 82 °C |
| Outer Diameter [mm]: | 52 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE180282 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MAZDA |
Criteria
| Length [mm]: | 18 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 10 mm |
| Spanner Size: | 19 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 10 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE180314 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | MAZDA |
Criteria
| Width [mm]: | 9,5 mm |
| Inner Diameter [mm]: | 90 mm |
| Outer Diameter [mm]: | 110 mm |
| Material: | FPM (fluoride rubber) |
| Fitting Position: | transmission sided |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE184272 |
| Brand: | FEBI BILSTEIN |
| Title: | Fuel Filter |
| Car: | MAZDA |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 130 mm |
| Outer Diameter [mm]: | 94 mm |
| Internal Thread Size: | 3/4" - 16 UNF |
| Seal Ring Diameter [mm]: | 4 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE185700 |
| Brand: | FEBI BILSTEIN |
| Title: | Pressure converter, turbocharger |
| Tag: | febi Plus |
| Car: | FORD |
Criteria
| Voltage [V]: | 12 V |
| Number of connectors: | 2 |
| Operating Mode: | Electric-pneumatic |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE186641 |
| Brand: | FEBI BILSTEIN |
| Title: | Alternator |
| Car: | MAZDA |
Criteria
| Voltage [V]: | 12 V |
| Alternator Charging Current [A]: | 70 A |
| Belt Pulley Ø [mm]: | 86 mm |
| Number of ribs: | 2 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194288 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | HYUNDAI |
Criteria
| Inner Diameter [mm]: | 14,4 mm |
| Height [mm]: | 2 mm |
| Outer Diameter [mm]: | 22 mm |
| Material: | Aluminium |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less

