Search by vehicle
Search by KBA
Search by engine
CHRYSLER ECB
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
CHRYSLER ECB
Choose a car by KBA.
CHRYSLER ECB
Choose an engine.
View search
Hide search
Spare parts CHRYSLER ECB
General information
| Code: | CR4183AM0.25 |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | CHRYSLER |
Criteria
| For shaft diameter from [mm]: | 47,74 mm |
| For shaft diameter from [inch]: | 1,879 Inch |
| For shaft diameter to [mm]: | 47,76 mm |
| For shaft diameter to [inch]: | 1,88 Inch |
| Thickness [inch]: | 0,064 Inch |
| Thickness [mm]: | 1,634 mm |
| Undersize [mm]: | 0,25 mm |
| For housing diameter from [mm]: | 51,04 mm |
| For housing diameter from [inch]: | 2,01 Inch |
| For housing diameter up to [mm]: | 51,06 mm |
| For housing diameter up to [inch]: | 2,01 Inch |
| Length [mm]: | 20,45 mm |
| Technical Information: | OE-Replacment version (Bi-Metal), housing bore +.002" |
| Technical Information: | 4 pairs |
| Technical Information: | CR4183AM0.25 is housing bore +.002" of CR4195AM0.25 |
| Installation Information: | Bearings are designed with .002" oversize diameter |
| Installation Information: | allowing to repair the housing of rod by boring rods |
Show all
Show less
General information
| Code: | CR4195AM |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | CHRYSLER |
Criteria
| For shaft diameter from [mm]: | 47,99 mm |
| For shaft diameter from [inch]: | 1,889 Inch |
| For shaft diameter to [mm]: | 48,01 mm |
| For shaft diameter to [inch]: | 1,89 Inch |
| Standard Size [STD]: | yes |
| Thickness [inch]: | 0,058 Inch |
| Thickness [mm]: | 1,483 mm |
| For housing diameter from [mm]: | 50,99 mm |
| For housing diameter from [inch]: | 2,008 Inch |
| For housing diameter up to [mm]: | 51,01 mm |
| For housing diameter up to [inch]: | 2,008 Inch |
| Length [mm]: | 20,45 mm |
| Technical Information: | OE-Replacment version (Bi-Metal), 4 pairs |
Show all
Show less
General information
| Code: | CR4195AM0.25 |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | CHRYSLER |
Criteria
| Undersize [mm]: | 0,25 mm |
| For shaft diameter from [mm]: | 47,74 mm |
| For shaft diameter from [inch]: | 1,879 Inch |
| For shaft diameter to [mm]: | 47,76 mm |
| For shaft diameter to [inch]: | 1,88 Inch |
| Thickness [inch]: | 0,063 Inch |
| Thickness [mm]: | 1,608 mm |
| For housing diameter from [mm]: | 50,99 mm |
| For housing diameter from [inch]: | 2,008 Inch |
| For housing diameter up to [mm]: | 51,01 mm |
| For housing diameter up to [inch]: | 2,008 Inch |
| Length [mm]: | 20,45 mm |
| Technical Information: | OE-Replacment version (Bi-Metal), 4 pairs |
Show all
Show less
General information
| Code: | FE108158 |
| Brand: | FEBI BILSTEIN |
| Title: | Ignition Coil |
| Car: | CHRYSLER |
Criteria
| Ignition Coil: | 4 Spark |
| Number of connectors: | 3 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE108810 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MINI |
Criteria
| Length [mm]: | 30 mm |
| Outer Diameter [mm]: | 28 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 13 mm |
| Quality/ Grade: | 4.8 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Bright Zinc-Plated |
| Screw length below head [mm]: | 19 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE177433 |
| Brand: | FEBI BILSTEIN |
| Title: | Oxygen Sensor |
| Car: | CHRYSLER |
Criteria
| Oxygen Sensor: | Heated |
| External Thread Size: | M18 x 1,5 |
| Spanner Size: | 22 |
| Number of circuits: | 4 |
| Cable Length [mm]: | 460 mm |
| For OE number: | 4606135AB |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE177572 |
| Brand: | FEBI BILSTEIN |
| Title: | Oxygen Sensor |
| Car: | CHRYSLER |
Criteria
| Oxygen Sensor: | Heated |
| Oxygen Sensor: | Regulating Sensor |
| External Thread Size: | M18 x 1,5 |
| Spanner Size: | 22 |
| Number of circuits: | 4 |
| Cable Length [mm]: | 460 mm |
| For OE number: | 4686933AB |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE177679 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, camshaft |
| Car: | OPEL |
Criteria
| Height [mm]: | 7 mm |
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 48 mm |
| Material: | FPM (fluoride rubber) |
| Fitting Position: | Front |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE27147 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | TOYOTA |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 85 mm |
| Outer Diameter [mm]: | 78 mm |
| Internal Thread Size: | 3/4" - 16 UNF |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE28260 |
| Brand: | FEBI BILSTEIN |
| Title: | Deflection Pulley/Guide Pulley, timing belt |
| Car: | CHRYSLER |
Criteria
| Width [mm]: | 35 mm |
| Inner Diameter [mm]: | 10 mm |
| Outer Diameter [mm]: | 62 mm |
| Material: | Metal |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less