Search by vehicle
Search by KBA
Search by engine
NISSAN VR38DETT
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
NISSAN VR38DETT
Choose a car by KBA.
NISSAN VR38DETT
Choose an engine.
View search
Hide search
Spare parts NISSAN VR38DETT
General information
| Code: | 7.01738.01.0 |
| Brand: | PIERBURG |
| Title: | Boost Pressure Control Valve |
| Car: | NISSAN |
Criteria
| Valve Type: | Switch Valve |
| Operating Mode: | Electric |
| Voltage [V]: | 12 V |
Show all
Show less
General information
| Code: | 7.29603.07.0 |
| Brand: | PIERBURG |
| Title: | Oil Pump |
| Car: | NISSAN |
General information
| Code: | CR6870XPNC |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | NISSAN |
Criteria
| Thickness [inch]: | 0,059 Inch |
| Thickness [mm]: | 1,51 mm |
| For shaft diameter from [mm]: | 55,94 mm |
| For shaft diameter from [inch]: | 2,203 Inch |
| For shaft diameter to [mm]: | 55,96 mm |
| For shaft diameter to [inch]: | 2,203 Inch |
| Standard Size [STD]: | yes |
| For housing diameter from [mm]: | 59 mm |
| For housing diameter from [inch]: | 2,323 Inch |
| For housing diameter up to [mm]: | 59,01 mm |
| For housing diameter up to [inch]: | 2,323 Inch |
| Length [mm]: | 15,9 mm |
| Technical Information: | Race Version (pMax Black & Polymer), Narrow, 6 pairs |
| Installation Information: | Bearings are narrower than typical OE/Stock version |
| Installation Information: | for fillet crankshat |
Show all
Show less
General information
| Code: | CR6870XPNC0.25 |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | NISSAN |
Criteria
| Undersize [mm]: | 0,25 mm |
| Thickness [inch]: | 0,064 Inch |
| Thickness [mm]: | 1,635 mm |
| For shaft diameter from [mm]: | 55,69 mm |
| For shaft diameter from [inch]: | 2,193 Inch |
| For shaft diameter to [mm]: | 55,71 mm |
| For shaft diameter to [inch]: | 2,193 Inch |
| For housing diameter from [mm]: | 59 mm |
| For housing diameter from [inch]: | 2,323 Inch |
| For housing diameter up to [mm]: | 59,01 mm |
| For housing diameter up to [inch]: | 2,323 Inch |
| Length [mm]: | 15,9 mm |
| Technical Information: | Race Version (pMax Black & Polymer), Narrow, 6 pairs |
| Installation Information: | Bearings are narrower than typical OE/Stock version |
| Installation Information: | for fillet crankshat |
Show all
Show less
General information
| Code: | CR6870XPNC.026 |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | NISSAN |
Criteria
| Undersize [mm]: | 0,026 mm |
| Thickness [inch]: | 0,06 Inch |
| Thickness [mm]: | 1,523 mm |
| For shaft diameter from [mm]: | 55,915 mm |
| For shaft diameter from [inch]: | 2,202 Inch |
| For shaft diameter to [mm]: | 55,935 mm |
| For shaft diameter to [inch]: | 2,202 Inch |
| For housing diameter from [mm]: | 59 mm |
| For housing diameter from [inch]: | 2,323 Inch |
| For housing diameter up to [mm]: | 59,01 mm |
| For housing diameter up to [inch]: | 2,323 Inch |
| Length [mm]: | 15,9 mm |
| Technical Information: | Race Version (pMax Black & Polymer), Narrow, 6 pairs |
| Installation Information: | Bearings are narrower than typical OE/Stock version |
| Installation Information: | for fillet crankshat |
Show all
Show less
General information
| Code: | CR6870XPNDC.026 |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | NISSAN |
Criteria
| For shaft diameter from [mm]: | 55,915 mm |
| For shaft diameter from [inch]: | 2,202 Inch |
| For shaft diameter to [mm]: | 55,935 mm |
| For shaft diameter to [inch]: | 2,202 Inch |
| Thickness [inch]: | 0,06 Inch |
| Thickness [mm]: | 1,523 mm |
| Undersize [mm]: | 0,026 mm |
| For housing diameter from [mm]: | 59 mm |
| For housing diameter from [inch]: | 2,323 Inch |
| For housing diameter up to [mm]: | 59,01 mm |
| For housing diameter up to [inch]: | 2,323 Inch |
| Length [mm]: | 15,9 mm |
| Technical Information: | Race Version (pMax Black & Polymer), Narrow, Dowel Pin |
| Technical Information: | 6 pairs |
| Installation Information: | Bearings are narrower than typical OE/Stock version |
| Installation Information: | for fillet crankshat; Bearings contains holes for dowel pins |
Show all
Show less
General information
| Code: | CR6870XPNDC STDX |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | NISSAN |
Criteria
| For shaft diameter from [mm]: | 55,965 mm |
| For shaft diameter from [inch]: | 2,204 Inch |
| For shaft diameter to [mm]: | 55,985 mm |
| For shaft diameter to [inch]: | 2,204 Inch |
| Thickness [inch]: | 0,058 Inch |
| Thickness [mm]: | 1,497 mm |
| Standard Size [STD]: | yes |
| For housing diameter from [mm]: | 59 mm |
| For housing diameter from [inch]: | 2,323 Inch |
| For housing diameter up to [mm]: | 59,01 mm |
| For housing diameter up to [inch]: | 2,323 Inch |
| Length [mm]: | 15,9 mm |
| Technical Information: | Race Version (pMax Black & Polymer), Narrow, Dowel Pin |
| Technical Information: | 6 pairs |
| Installation Information: | Bearings are narrower than typical OE/Stock version |
| Installation Information: | for fillet crankshat; Bearings contains holes for dowel pins |
Show all
Show less
General information
| Code: | FE102328 |
| Brand: | FEBI BILSTEIN |
| Title: | Alternator Freewheel Clutch |
| Car: | PEUGEOT |
Criteria
| Width [mm]: | 37,6 mm |
| Inner Diameter [mm]: | 17 mm |
| Outer Diameter [mm]: | 55 mm |
| Number of ribs: | 6 |
| Supplementary Article/Supplementary Info 2: | with cover |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE107544 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, coolant temperature |
| Car: | NISSAN |
Criteria
| Number of connectors: | 2 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE175783 |
| Brand: | FEBI BILSTEIN |
| Title: | Oxygen Sensor |
| Car: | NISSAN |
Criteria
| Oxygen Sensor: | Heated |
| External Thread Size: | M18 x 1,5 |
| Spanner Size: | 22 |
| Number of circuits: | 4 |
| Cable Length [mm]: | 250 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less