Search by vehicle
Search by KBA
Search by engine
HONDA (GAC) L15A1
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
HONDA (GAC) L15A1
Choose a car by KBA.
HONDA (GAC) L15A1
Choose an engine.
View search
Hide search
Spare parts HONDA (GAC) L15A1
General information
| Code: | 130.560 |
| Brand: | ELRING |
| Title: | Seal Ring, valve stem |
| Car: | HONDA |
Criteria
| Colour: | green |
| Valve Stem Diameter [mm]: | 5,5 mm |
| Inner Diameter [mm]: | 11 mm |
| Outer Diameter [mm]: | 13 mm |
| Height [mm]: | 10 mm |
| Material: | FPM (fluoride rubber) |
Show all
Show less
Netto price:
USD $1.29
(USD $1.29 without VAT 0%)
Your price:
-25%
USD $0.97
(USD $0.97 without VAT 0%)
| Warehouse: | 2 pcs |
General information
| Code: | 590.797 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | OPEL |
Criteria
| Inner Diameter [mm]: | 80 mm |
| Outer Diameter [mm]: | 98 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | A/BS |
| Swirl Type: | Left-hand Twist |
| Material: | FPM (fluoride rubber) |
| Dust Cover: | with dust lip |
| Goods tariff number: | 8484200000 |
Show all
Show less
Netto price:
USD $5.33
(USD $5.33 without VAT 0%)
Your price:
-25%
USD $4.00
(USD $4.00 without VAT 0%)
| Warehouse: | 1 pcs |
General information
| Code: | CR4398SM0.25 |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | HONDA |
Criteria
| Undersize [mm]: | 0,25 mm |
| Thickness [inch]: | 0,064 Inch |
| Thickness [mm]: | 1,633 mm |
| For shaft diameter from [mm]: | 39,72 mm |
| For shaft diameter from [inch]: | 1,564 Inch |
| For shaft diameter to [mm]: | 39,75 mm |
| For shaft diameter to [inch]: | 1,565 Inch |
| For housing diameter up to [mm]: | 43,04 mm |
| For housing diameter up to [inch]: | 1,694 Inch |
| Length [mm]: | 13,5 mm |
| Technical Information: | OE-Replacment version (Bi-Metal), 4 pairs |
Show all
Show less
General information
| Code: | FE30570 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | HONDA |
Criteria
| Housing material: | Cast Aluminium |
| Water pump impeller material: | Metal |
| Seal Material: | Rubber |
| Number of blades/vanes: | 7 |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE30896 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, intake manifold pressure |
| Car: | HONDA |
Criteria
| Housing Colour: | black |
| Number of connectors: | 3 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE31480 |
| Brand: | FEBI BILSTEIN |
| Title: | Deflection/Guide Pulley, V-ribbed belt |
| Car: | HONDA |
Criteria
| Width of castor bearing surface [mm]: | 26 mm |
| Inner Diameter [mm]: | 17 mm |
| Outer Diameter [mm]: | 80 mm |
| Mounting points diameter [mm]: | 17 mm |
| Material: | Metal |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | MB5427SI0.25 |
| Brand: | KING |
| Title: | Crankshaft Bearing Shell Set |
| Car: | HONDA |
Criteria
| Thickness [inch]: | 0,084 Inch |
| Thickness [mm]: | 2,137 mm |
| For shaft diameter from [mm]: | 49,72 mm |
| For shaft diameter from [inch]: | 1,958 Inch |
| For shaft diameter to [mm]: | 49,75 mm |
| For shaft diameter to [inch]: | 1,959 Inch |
| Undersize [mm]: | 0,25 mm |
| For housing diameter up to [mm]: | 54,08 mm |
| For housing diameter up to [inch]: | 2,129 Inch |
| Length [mm]: | 17 mm |
| Technical Information: | OE-Replacment version (Bi-Metal), 5 pairs |
Show all
Show less
General information
| Code: | MB5427SI0.5 |
| Brand: | KING |
| Title: | Crankshaft Bearing Shell Set |
| Car: | HONDA |
Criteria
| Thickness [inch]: | 0,089 Inch |
| Thickness [mm]: | 2,262 mm |
| For shaft diameter from [mm]: | 49,47 mm |
| For shaft diameter from [inch]: | 1,948 Inch |
| For shaft diameter to [mm]: | 49,5 mm |
| For shaft diameter to [inch]: | 1,949 Inch |
| Undersize [mm]: | 0,5 mm |
| For housing diameter up to [mm]: | 54,08 mm |
| For housing diameter up to [inch]: | 2,129 Inch |
| Length [mm]: | 17 mm |
| Technical Information: | OE-Replacment version (Bi-Metal), 5 pairs |
Show all
Show less
General information
| Code: | TW 189AM0.25 |
| Brand: | KING |
| Title: | Thrust Washer Set, crankshaft |
| Car: | HONDA |
Criteria
| Thickness [inch]: | 0,102 Inch |
| Thickness [mm]: | 2,589 mm |
| For shaft diameter from [mm]: | -0,25 mm |
| For shaft diameter from [inch]: | -0,01 Inch |
| For shaft diameter to [mm]: | 61,05 mm |
| For shaft diameter to [inch]: | 2,403 Inch |
| Undersize [mm]: | 0,25 mm |
| For housing diameter up to [mm]: | 82,04 mm |
| For housing diameter up to [inch]: | 3,23 Inch |
| Technical Information: | OE-Replacment version (Bi-Metal), 1 pairs |
Show all
Show less
General information
| Code: | CB-2219A 0.25 |
| Brand: | KOLBENSCHMIDT |
| Title: | Connecting Rod Bearing Shell Set |
| Tag: | NDC |
| Car: | HONDA |
Criteria
| Component Number: | GL2292 |
| Repair Grade: | 0,25 |
| Quantity Unit: | Set |
Show all
Show less