Search by vehicle
Search by KBA
Search by engine
MAZDA WLE7
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA WLE7
Choose a car by KBA.
MAZDA WLE7
Choose an engine.
View search
Hide search
Spare parts MAZDA WLE7
General information
| Code: | 036.164 |
| Brand: | ELRING |
| Title: | Sealing compound - Dirko - Grey, 70ml |
| Tag: | Dirko HT |
| Car: | ŠKODA-VW |
Criteria
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | UV resistant |
| Container Type: | Tube |
| Capacity [ml]: | 70 ml |
| Material: | Silicone |
| Temperature range from [°C]: | -60 °C |
| Temperature range to [°C]: | 315 °C |
Show all
Show less
Netto price:
USD $6.00
(USD $6.00 without VAT 0%)
Your price:
-25%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | RA06-1010 |
| Brand: | FRECCIA |
| Title: | Rocker arm, engine timing |
| Car: | MAZDA |
Netto price:
USD $9.38
(USD $9.38 without VAT 0%)
Your price:
-30%
USD $6.57
(USD $6.57 without VAT 0%)
price per 1 pcs
| Warehouse: | 4 pcs |
Packs of 8 pcs · opened pack in stock
General information
| Code: | 50013854 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | MITSUBISHI |
Criteria
| Filter type: | Spin-on Filter |
| Outer Diameter 1 [mm]: | 95 mm |
| Inner Diameter 1 [mm]: | 62 mm |
| Thread Size: | M26x1,5 |
| Height [mm]: | 140 mm |
| Bypass Valve Opening Pressure [bar]: | 1,2 bar |
| Supplementary Article/Supplementary Info 2: | with one anti-return valve |
Show all
Show less
General information
| Code: | 50014149 |
| Brand: | KOLBENSCHMIDT |
| Title: | Air Filter |
| Car: | FORD |
Criteria
| Length [mm]: | 250 mm |
| Width [mm]: | 200 mm |
| Height [mm]: | 52 mm |
| Filter type: | Filter Insert |
Show all
Show less
General information
| Code: | FE107707 |
| Brand: | FEBI BILSTEIN |
| Title: | Thermostat, coolant |
| Car: | MAZDA |
Criteria
| Opening Temperature [°C]: | 82 °C |
| Outer Diameter [mm]: | 52 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE108979 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | TOYOTA |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 120 mm |
| Outer Diameter [mm]: | 100 mm |
| Internal Thread Size: | M24 x 1,5 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE173885 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt |
| Car: | FORD |
Criteria
| Width [mm]: | 30 mm |
| Material: | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of Teeth: | 101 |
| Surface: | PTFE (Polytetrafluorethylene) coated |
| Belts: | with rounded tooth profile |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE174014 |
| Brand: | FEBI BILSTEIN |
| Title: | Tensioner Pulley, timing belt |
| Car: | MAZDA |
Criteria
| Width of castor bearing surface [mm]: | 32 mm |
| Width [mm]: | 36,8 mm |
| Outer Diameter [mm]: | 58 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE180282 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MAZDA |
Criteria
| Length [mm]: | 18 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 10 mm |
| Spanner Size: | 19 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 10 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE180314 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | MAZDA |
Criteria
| Width [mm]: | 9,5 mm |
| Inner Diameter [mm]: | 90 mm |
| Outer Diameter [mm]: | 110 mm |
| Material: | FPM (fluoride rubber) |
| Fitting Position: | transmission sided |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less