Search by vehicle
Search by KBA
Search by engine
CHRYSLER EGZ
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
CHRYSLER EGZ
Choose a car by KBA.
CHRYSLER EGZ
Choose an engine.
View search
Hide search
Spare parts CHRYSLER EGZ
General information
| Code: | 424.841 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | MERCEDES |
Criteria
| Inner Diameter [mm]: | 45 mm |
| Outer Diameter [mm]: | 67 mm |
| Height [mm]: | 8 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Installation Information: | Mounting dry and without any additional oil and grease |
Show all
Show less
Netto price:
USD $7.71
(USD $7.71 without VAT 0%)
Your price:
-25%
USD $5.78
(USD $5.78 without VAT 0%)
| Warehouse: | 5 pcs |
General information
| Code: | 893.889 |
| Brand: | ELRING |
| Title: | Seal Ring, injector |
| Car: | Alpina Audi BMW Chevrolet Chrysler Citroën Cupra Daewoo DS Fiat Ford Jeep Land Rover Lotus Mazda Mercedes-Benz Mini Mitsubishi Nissan Opel Peugeot Porsche Puch Renault Rolls-Royce Seat Škoda-VW Smart Spyker SsangYong Toyota Volkswagen Wiesmann |
Criteria
| Inner Diameter [mm]: | 7,52 mm |
| Thickness [mm]: | 3,5 mm |
| Material: | FPM (fluoride rubber) |
| Cross-Sectional Form: | O-Ring |
Show all
Show less
Your price:
USD $0.36
(USD $0.36 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | FE07215 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | MERCEDES |
Criteria
| Thickness [mm]: | 1,5 mm |
| Inner Diameter [mm]: | 14 mm |
| Outer Diameter [mm]: | 20 mm |
| DIN/ISO: | 7603 A/CU |
| Material: | Copper |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
Your price:
USD $0.10
(USD $0.10 without VAT 0%)
| Warehouse: | > 25 pcs | |
| Supplier: | > 9 pcs |
General information
| Code: | 50013438 |
| Brand: | KOLBENSCHMIDT |
| Title: | Fuel Filter |
| Car: | MERCEDES |
Criteria
| Filter type: | In-Line Filter |
| Outer Diameter 1 [mm]: | 75 mm |
| Height [mm]: | 162 mm |
Show all
Show less
General information
| Code: | 50013568 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | MERCEDES |
Criteria
| Filter type: | Filter Insert |
| Outer Diameter 1 [mm]: | 65 mm |
| Inner Diameter 1 [mm]: | 32 mm |
| Inner Diameter 2 [mm]: | 32 mm |
| Height [mm]: | 116 mm |
Show all
Show less
General information
| Code: | 7.05271.79.0 |
| Brand: | PIERBURG |
| Title: | Oxygen Sensor |
Criteria
| Oxygen Sensor: | Heated |
| Conductor Number: | 4 conductor |
| Cable Length [mm]: | 300 mm |
Show all
Show less
General information
| Code: | 7.06740.02.0 |
| Brand: | PIERBURG |
| Title: | Auxiliary Water Pump (cooling water circuit) |
| Car: | MERCEDES |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12 V |
| For OE number: | A 001 835 13 64 |
Show all
Show less
General information
| Code: | AWP0104 |
| Brand: | FRECCIA |
| Title: | Auxiliary Water Pump (cooling water circuit) |
| Car: | MERCEDES |
Criteria
| Operating Mode: | Electric |
General information
| Code: | FE03912 |
| Brand: | FEBI BILSTEIN |
| Title: | Cap, oil filler neck |
| Car: | MERCEDES |
Criteria
| Colour: | black |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE04054 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | MERCEDES |
Criteria
| Thickness [mm]: | 1,5 mm |
| Inner Diameter [mm]: | 12 mm |
| Outer Diameter [mm]: | 17 mm |
| DIN/ISO: | 7603 |
| Material: | Copper |
| Shape: | A Shape |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less