Search by vehicle
Search by KBA
Search by engine
HONDA ELYSION (RR)
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
HONDA ELYSION (RR)
Choose a car by KBA.
HONDA ELYSION (RR)
Choose an engine.
View search
Hide search
Spare parts HONDA ELYSION (RR)
General information
| Code: | 036.164 |
| Brand: | ELRING |
| Title: | Sealing compound - Dirko - Grey, 70ml |
| Tag: | Dirko HT |
| Car: | ŠKODA-VW |
Criteria
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | UV resistant |
| Container Type: | Tube |
| Capacity [ml]: | 70 ml |
| Material: | Silicone |
| Temperature range from [°C]: | -60 °C |
| Temperature range to [°C]: | 315 °C |
Show all
Show less
Netto price:
USD $6.00
(USD $6.00 without VAT 0%)
Your price:
-25%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 130.560 |
| Brand: | ELRING |
| Title: | Seal Ring, valve stem |
| Car: | HONDA |
Criteria
| Colour: | green |
| Valve Stem Diameter [mm]: | 5,5 mm |
| Inner Diameter [mm]: | 11 mm |
| Outer Diameter [mm]: | 13 mm |
| Height [mm]: | 10 mm |
| Material: | FPM (fluoride rubber) |
Show all
Show less
Netto price:
USD $1.29
(USD $1.29 without VAT 0%)
Your price:
-25%
USD $0.97
(USD $0.97 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 590.797 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | OPEL |
Criteria
| Inner Diameter [mm]: | 80 mm |
| Outer Diameter [mm]: | 98 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | A/BS |
| Swirl Type: | Left-hand Twist |
| Material: | FPM (fluoride rubber) |
| Dust Cover: | with dust lip |
| Goods tariff number: | 8484200000 |
Show all
Show less
Netto price:
USD $5.33
(USD $5.33 without VAT 0%)
Your price:
-25%
USD $4.00
(USD $4.00 without VAT 0%)
| Warehouse: | 1 pcs |
General information
| Code: | 0242240675 |
| Brand: | BOSCH |
| Title: | Spark Plug |
| Tag: | Double Iridium |
| Car: | HONDA |
Criteria
| Electrode Gap [mm]: | 1,1 mm |
| Tightening Torque [Nm]: | 28 Nm |
| Thread Size: | M 14 x 1,25 |
| Thread Length [mm]: | 19 mm |
| Spanner Size: | 16 |
| Spark Position [mm]: | 5 mm |
| Number of pins: | 1 -pin connector |
Show all
Show less
General information
| Code: | 0242245571 |
| Brand: | BOSCH |
| Title: | Spark Plug |
| Tag: | Iridium |
| Car: | AUDI |
Criteria
| Electrode Gap [mm]: | 0,7 mm |
| Tightening Torque [Nm]: | 28 Nm |
| Thread Size: | M 14 x 1,25 |
| Thread Length [mm]: | 19 mm |
| Spanner Size: | 16 |
| Spark Position [mm]: | 4 mm |
| Number of pins: | 1 -pin connector |
Show all
Show less
General information
| Code: | 0258986602 |
| Brand: | BOSCH |
| Title: | Oxygen Sensor |
| Car: | ŠKODA-VW |
Criteria
| Number of circuits: | 4 |
| Recommended change interval [km]: | 160000 km |
| Connector/Clamp: | Connector may need adjustment |
Show all
Show less
General information
| Code: | 352317101720 |
| Brand: | MAGNETI MARELLI |
| Title: | Thermostat, coolant |
| Car: | HONDA |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Opening Temperature [°C]: | 78 °C |
General information
| Code: | CR4542SM0.25 |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | HONDA |
Criteria
| Thickness [inch]: | 0,064 Inch |
| Thickness [mm]: | 1,625 mm |
| For shaft diameter from [mm]: | 47,73 mm |
| For shaft diameter from [inch]: | 1,879 Inch |
| For shaft diameter to [mm]: | 47,75 mm |
| For shaft diameter to [inch]: | 1,88 Inch |
| Undersize [mm]: | 0,25 mm |
| For housing diameter from [mm]: | 51 mm |
| For housing diameter from [inch]: | 2,008 Inch |
| For housing diameter up to [mm]: | 51,02 mm |
| For housing diameter up to [inch]: | 2,009 Inch |
| Length [mm]: | 15,4 mm |
| Technical Information: | OE-Replacment version (Bi-Metal), 4 pairs |
Show all
Show less
General information
| Code: | CR4542SM0.5 |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | HONDA |
Criteria
| Thickness [inch]: | 0,069 Inch |
| Thickness [mm]: | 1,75 mm |
| For shaft diameter from [mm]: | 47,48 mm |
| For shaft diameter from [inch]: | 1,869 Inch |
| For shaft diameter to [mm]: | 47,5 mm |
| For shaft diameter to [inch]: | 1,87 Inch |
| Undersize [mm]: | 0,5 mm |
| For housing diameter from [mm]: | 51 mm |
| For housing diameter from [inch]: | 2,008 Inch |
| For housing diameter up to [mm]: | 51,02 mm |
| For housing diameter up to [inch]: | 2,009 Inch |
| Length [mm]: | 15,4 mm |
| Technical Information: | OE-Replacment version (Bi-Metal), 4 pairs |
Show all
Show less
General information
| Code: | CR4542XPC STDX |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | HONDA |
Criteria
| Standard Size [STD]: | yes |
| Thickness [inch]: | 0,058 Inch |
| Thickness [mm]: | 1,487 mm |
| For shaft diameter from [mm]: | 48,005 mm |
| For shaft diameter from [inch]: | 1,89 Inch |
| For shaft diameter to [mm]: | 48,025 mm |
| For shaft diameter to [inch]: | 1,891 Inch |
| For housing diameter from [mm]: | 51 mm |
| For housing diameter from [inch]: | 2,008 Inch |
| For housing diameter up to [mm]: | 51,02 mm |
| For housing diameter up to [inch]: | 2,009 Inch |
| Length [mm]: | 15,4 mm |
| Technical Information: | Race Version (pMax Black & Polymer), 4 pairs |
Show all
Show less