Search by vehicle
Search by KBA
Search by engine
MAZDA CX-3 (DK) 1.5 SKYACTIV-G (DK6WA)
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA CX-3 (DK) 1.5 SKYACTIV-G (DK6WA)
Choose a car by KBA.
MAZDA CX-3 (DK) 1.5 SKYACTIV-G (DK6WA)
Choose an engine.
View search
Hide search
Spare parts MAZDA CX-3 (DK) 1.5 SKYACTIV-G (DK6WA)
General information
| Code: | 0242135529 |
| Brand: | BOSCH |
| Title: | Spark Plug |
| Tag: | Double Iridium |
| Car: | TOYOTA |
Criteria
| Electrode Gap [mm]: | 1,1 mm |
| Tightening Torque [Nm]: | 23 Nm |
| Thread Size: | M 12 x 1,25 |
| Thread Length [mm]: | 26,5 mm |
| Spanner Size: | 14 |
| Spark Position [mm]: | 4 mm |
| Number of pins: | 1 -pin connector |
Show all
Show less
General information
| Code: | ECP-MZ-013 |
| Brand: | NTY |
| Title: | Sensor, crankshaft pulse |
| Car: | MAZDA |
Criteria
| Voltage [V]: | 12 V |
| Number of pins: | 3 -pin connector |
| Connector Shape: | oval |
Show all
Show less
General information
| Code: | FE184535 |
| Brand: | FEBI BILSTEIN |
| Title: | Alternator Freewheel Clutch |
| Car: | MAZDA |
Criteria
| Width [mm]: | 55 mm |
| Inner Diameter [mm]: | 40 mm |
| Outer Diameter [mm]: | 55 mm |
| Number of ribs: | 6 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE186633 |
| Brand: | FEBI BILSTEIN |
| Title: | Ignition Coil |
| Car: | MAZDA |
Criteria
| Number of connectors: | 4 |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE188389 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | MAZDA |
Criteria
| Housing material: | Aluminium |
| Water pump impeller material: | Plastic |
| Seal Material: | Rubber |
| Number of blades/vanes: | 7 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE193872 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | HONDA |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 67 mm |
| Outer Diameter [mm]: | 68 mm |
| Internal Thread Size: | M20 x 1,5 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE193882 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | KIA |
Criteria
| Length [mm]: | 27 mm |
| Outer Diameter [mm]: | 23 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 17 mm |
| Spanner Size: | 17 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zink flake coated |
| Screw length below head [mm]: | 17 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194288 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | HYUNDAI |
Criteria
| Inner Diameter [mm]: | 14,4 mm |
| Height [mm]: | 2 mm |
| Outer Diameter [mm]: | 22 mm |
| Material: | Aluminium |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194318 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | KIA |
Criteria
| Length [mm]: | 27 mm |
| Outer Diameter [mm]: | 23 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 17 mm |
| Spanner Size: | 17 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zink flake coated |
| Screw length below head [mm]: | 17 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194709 |
| Brand: | FEBI BILSTEIN |
| Title: | Chain, oil pump drive |
| Car: | MAZDA |
Criteria
| Chain Type: | Simplex |
| Timing Chain Size: | G53RING |
| Number of chain links: | 60 |
| Chain Type: | Closed chain |
| Chain pitch [mm]: | 8 mm |
| Supplementary Article/Supplementary Info 2: | Requires special tools for mounting |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less