BMW 3 Convertible (E93) 320 i
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
BMW 3 Convertible (E93) 320 i
Choose a car by KBA.
BMW 3 Convertible (E93) 320 i
Choose an engine.
Sealing ring BMW 3 Convertible (E93) 320 i
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for BMW 3 Convertible (E93) 320 i. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a BMW 3 Convertible (E93) 320 i, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
| Warehouse: | 13 pcs |
General information
| Code: | 257.400 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | BMW |
Criteria
| Inner Diameter [mm]: | 65 mm |
| Outer Diameter [mm]: | 79 mm |
| Height [mm]: | 20 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 4 pcs |
General information
| Code: | 257.770 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | BMW |
Criteria
| Inner Diameter [mm]: | 90 mm |
| Outer Diameter [mm]: | 110 mm |
| Height [mm]: | 12 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 1 pcs |
General information
| Code: | FE47566 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | BMW |
Criteria
| Width [mm]: | 20 mm |
| Inner Diameter [mm]: | 65 mm |
| Outer Diameter [mm]: | 79 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Material: | PP (Polypropylene) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Fitting Position: | frontal sided |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | 327.299 |
| Brand: | ELRING |
| Title: | Shaft Seal, manual transmission |
| Car: | BMW |
Criteria
| Inner Diameter [mm]: | 15 mm |
| Outer Diameter [mm]: | 21 mm |
| Height [mm]: | 7 mm |
| Radial Shaft Seal Design: | AW/BS |
| Material: | NBR (nitrile butadiene rubber) |
| Dust Cover: | with dust lip |
| Goods tariff number: | 8484200000 |
| Warehouse: | 0 pcs | |
| Supplier: | Check |
| Warehouse: | 0 pcs | |
| Supplier: | Check |
General information
| Code: | B17.540 |
| Brand: | ELRING |
| Title: | Shaft Seal, automatic transmission flange |
| Car: | CHRYSLER |
Criteria
| Inner Diameter [mm]: | 44 mm |
| Outer Diameter [mm]: | 72 mm |
| Height [mm]: | 8 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Left-hand Twist |
| Material: | AEM (Ethylene Acrylate Rubber) |
| Dust Cover: | with dust lip |
| Warehouse: | 0 pcs | |
| Supplier: | Check |
General information
| Code: | NUP-BM-005 |
| Brand: | NTY |
| Title: | Shaft Seal, crankshaft |
| Car: | BMW |
Criteria
| Fitting Position: | frontal sided |
| Observe assembly information: | yes |
| Height [mm]: | 20 mm |
| Outer Diameter [mm]: | 79 mm |
| Inner Diameter [mm]: | 65 mm |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Swirl Type: | Right-hand Twist |
| Dust Cover: | with dust lip |
General information
| Code: | OS8314 |
| Brand: | BGA |
| Title: | Shaft Seal, crankshaft |
| Car: | BMW |
Criteria
| Fitting Position: | transmission sided |
| Height [mm]: | 12 mm |
| Outer Diameter [mm]: | 110 mm |
| Inner Diameter [mm]: | 90 mm |
| Material: | NBR (nitrile butadiene rubber) |
| Material: | PTFE (polytetrafluoroethylene) |

