LAND ROVER DEFENDER Cabrio (L316) 2.4 Td4 4x4 (L317)
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
LAND ROVER DEFENDER Cabrio (L316) 2.4 Td4 4x4 (L317)
Choose a car by KBA.
LAND ROVER DEFENDER Cabrio (L316) 2.4 Td4 4x4 (L317)
Choose an engine.
Sealing ring LAND ROVER DEFENDER Cabrio (L316) 2.4 Td4 4x4 (L317)
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for LAND ROVER DEFENDER Cabrio (L316) 2.4 Td4 4x4 (L317). K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a LAND ROVER DEFENDER Cabrio (L316) 2.4 Td4 4x4 (L317), we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
General information
| Code: | 026.782 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | FORD |
Criteria
| Inner Diameter [mm]: | 50 mm |
| Outer Diameter [mm]: | 90 mm |
| Height [mm]: | 14 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Goods tariff number: | 8409999990 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 12 pcs |
General information
| Code: | 026.812 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | FORD |
Criteria
| Inner Diameter [mm]: | 106 mm |
| Radial Shaft Seal Design: | IWD |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Housing Type: | with housing |
| Observe assembly information: | yes |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Goods tariff number: | 8409999990 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 6 pcs |
General information
| Code: | FE103216 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | FORD |
Criteria
| Width [mm]: | 15 mm |
| Inner Diameter [mm]: | 49 mm |
| Outer Diameter [mm]: | 91 mm |
| Fitting Position: | frontal sided |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | 81-90013-00 |
| Brand: | VICTOR REINZ |
| Title: | Shaft Seal, crankshaft |
| Car: | FORD |
Criteria
| Material: | PTFE (polytetrafluoroethylene) |
| Supplementary Article/Supplementary Info 2: | with flange |
General information
| Code: | 81-90014-00 |
| Brand: | VICTOR REINZ |
| Title: | Shaft Seal, crankshaft |
| Car: | FORD |
Criteria
| Material: | PTFE (polytetrafluoroethylene) |
| Supplementary Article/Supplementary Info 2: | with flange |
| Inner Diameter [mm]: | 50 mm |
| Outer Diameter [mm]: | 90 mm |
General information
| Code: | NA5030 |
| Brand: | PAYEN |
| Title: | Shaft Seal, crankshaft |
| Car: | FORD |
Criteria
| Observe assembly information: | yes |
| Height 1 [mm]: | 15,2 mm |
| Outer Diameter 1 [mm]: | 190 mm |
| Outer Diameter 2 [mm]: | 196 mm |
| Inner Diameter [mm]: | 106 mm |
| Material: | PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) |
| Radial Shaft Seal Design: | 841S LD |
| Swirl Type: | Left-hand Twist |
| Rotation Direction: | Anticlockwise rotation |
| Housing Type: | Integrated housing |
General information
| Code: | NA5031 |
| Brand: | PAYEN |
| Title: | Shaft Seal, crankshaft |
| Car: | FORD |
Criteria
| Observe assembly information: | yes |
| Height 1 [mm]: | 13,7 mm |
| Outer Diameter 1 [mm]: | 86,5 mm |
| Inner Diameter [mm]: | 50 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Radial Shaft Seal Design: | 827S W |
| Swirl Type: | Right-hand Twist |