RENAULT MEGANE III Coupe (DZ0/1_) 1.5 dCi (DZ09, DZ0D, DZ1F, DZ1G, DZ14, DZ29)
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
RENAULT MEGANE III Coupe (DZ0/1_) 1.5 dCi (DZ09, DZ0D, DZ1F, DZ1G, DZ14, DZ29)
Choose a car by KBA.
RENAULT MEGANE III Coupe (DZ0/1_) 1.5 dCi (DZ09, DZ0D, DZ1F, DZ1G, DZ14, DZ29)
Choose an engine.
Connecting rod RENAULT MEGANE III Coupe (DZ0/1_) 1.5 dCi (DZ09, DZ0D, DZ1F, DZ1G, DZ14, DZ29)
K MOTORSHOP offers our customers a comprehensive portfolio of CONNECTING ROD for RENAULT MEGANE III Coupe (DZ0/1_) 1.5 dCi (DZ09, DZ0D, DZ1F, DZ1G, DZ14, DZ29). K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a CONNECTING ROD for a RENAULT MEGANE III Coupe (DZ0/1_) 1.5 dCi (DZ09, DZ0D, DZ1F, DZ1G, DZ14, DZ29), we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
General information
| Code: | 50009159 |
| Brand: | KOLBENSCHMIDT |
| Title: | Connecting Rod |
| Car: | RENAULT |
Criteria
| Diameter of large connecting rod big end [mm]: | 47,61 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 26,013 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
| Length [mm]: | 133,75 mm |
General information
| Code: | OM0045 |
| Brand: | ET ENGINETEAM |
| Title: | Connecting Rod |
| Car: | Dacia Nissan Renault Duster Lodgy Logan Cube Kubistar Note Clio Grand Scénic Kangoo K9K 1,5 dCi |
Criteria
| Tightening Torque [Nm]: | 60 Nm |
| Diameter of large connecting rod big end [mm]: | 47,6 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 26 mm |
| Hole Spacing [mm]: | 96,94 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
General information
| Code: | CO002000 |
| Brand: | IPSA |
| Title: | Connecting Rod |
| Car: | RENAULT |
Criteria
| Tightening Torque [Nm]: | 60 Nm |
| Hole Spacing [mm]: | 133,8 mm |
| Cylinder Bore [mm]: | 76 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
| Pin Diameter [mm]: | 26 mm |
| Weight [g]: | 535 g |