SEAT IBIZA IV ST (6J8, 6P8) 1.4 TSI
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
SEAT IBIZA IV ST (6J8, 6P8) 1.4 TSI
Choose a car by KBA.
SEAT IBIZA IV ST (6J8, 6P8) 1.4 TSI
Choose an engine.
Sealing ring SEAT IBIZA IV ST (6J8, 6P8) 1.4 TSI
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for SEAT IBIZA IV ST (6J8, 6P8) 1.4 TSI. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a SEAT IBIZA IV ST (6J8, 6P8) 1.4 TSI, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
| Warehouse: | > 25 pcs |
General information
| Code: | 155.560 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 48 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Observe assembly information: | yes |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | > 25 pcs |
General information
| Code: | 381.640 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | Audi A1/A3 Seat Alhambra Altea Cordoba Ibiza Leon Toledo Škoda-VW Fabia/Octavia-II Rapid Roomster Superb Yeti Volkswagen Beetle Caddy Eos Golf Jetta Passat Polo Tiguan Touran CAVE/CAXA/CAXC/CBZA/CBZB/CDDA/CDEA/CFNA/CGGA/CGGB/CLRA/CLSA/CTHE 2007+ |
Criteria
| Observe assembly information: | yes |
| Inner Diameter [mm]: | 85 mm |
| Radial Shaft Seal Design: | IWD |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Housing Type: | with housing |
| Article Number of the recommended special tool: | T10134 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 4 pcs |
General information
| Code: | FE32471 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 10 mm |
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 48 mm |
| Fitting Position: | frontal sided |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | 454.260 |
| Brand: | ELRING |
| Title: | Shaft Seal, differential |
| Car: | VW |
Criteria
| Inner Diameter [mm]: | 50 mm |
| Outer Diameter [mm]: | 65 mm |
| Height [mm]: | 8 mm |
| Radial Shaft Seal Design: | AW/BS |
| Swirl Type: | Alternating Twist |
| Material: | ACM (Polyacrylate) |
| Dust Cover: | with dust lip |
| Goods tariff number: | 8484200000 |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | 454.820 |
| Brand: | ELRING |
| Title: | Shaft Seal, differential |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 60 mm |
| Outer Diameter [mm]: | 74 mm |
| Height [mm]: | 8 mm |
| Radial Shaft Seal Design: | A/BS |
| Swirl Type: | Alternating Twist |
| Material: | ACM (Polyacrylate) |
| Dust Cover: | with dust lip |
| Goods tariff number: | 8484200000 |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | 20035571B |
| Brand: | CORTECO |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Fitting Position: | transmission sided |
| Supplementary Article/Supplementary Info 2: | with flange |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Height [mm]: | 15 mm |
| Outer Diameter [mm]: | 131 mm |
| Outer Diameter 1 [mm]: | 152 mm |
| Inner Diameter [mm]: | 85 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| For OE number: | 036103171 |
General information
| Code: | 81-34366-00 |
| Brand: | VICTOR REINZ |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Material: | PTFE (polytetrafluoroethylene) |
| Material: | ACM (Polyacrylate) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 48 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | A SL |
| Swirl Type: | Right-hand Twist |

