SKODA SUPERB II (3T4) 3.6 FSI 4x4
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
SKODA SUPERB II (3T4) 3.6 FSI 4x4
Choose a car by KBA.
SKODA SUPERB II (3T4) 3.6 FSI 4x4
Choose an engine.
Sealing ring SKODA SUPERB II (3T4) 3.6 FSI 4x4
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for SKODA SUPERB II (3T4) 3.6 FSI 4x4. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a SKODA SUPERB II (3T4) 3.6 FSI 4x4, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
General information
| Code: | 158.430 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 85 mm |
| Outer Diameter [mm]: | 105 mm |
| Height [mm]: | 11 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 1 pcs |
General information
| Code: | FE46155 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 11 mm |
| Inner Diameter [mm]: | 85 mm |
| Outer Diameter [mm]: | 105 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Fitting Position: | transmission sided |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | 332.590 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | Porsche Cayenne Škoda-VW Superb-II Volkswagen Atlas CC Eos Passat Phaeton Touereg 3,6i M55.01 M55.02 BLV BMF BWS CDVA CDVB CDVC CDVD CGRA CHNA CKPA 2008+ |
Criteria
| Inner Diameter [mm]: | 58 mm |
| Radial Shaft Seal Design: | SP |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) |
| Dust Cover: | with dust lip |
| Housing Type: | with housing |
| Observe assembly information: | yes |
| Goods tariff number: | 8409919990 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | 871.180 |
| Brand: | ELRING |
| Title: | Shaft Seal, differential |
| Car: | VW |
Criteria
| Inner Diameter [mm]: | 67 mm |
| Outer Diameter [mm]: | 83 mm |
| Height [mm]: | 8 mm |
| Radial Shaft Seal Design: | A/BS2 |
| Swirl Type: | Alternating Twist |
| Material: | ACM (Polyacrylate) |
| Dust Cover: | with dust lip |
| Goods tariff number: | 8484200000 |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | 01033862B |
| Brand: | CORTECO |
| Title: | Shaft Seal, differential |
| Car: | ŠKODA-VW |
Criteria
| Height [mm]: | 8 mm |
| Height 1 [mm]: | 8 mm |
| Inner Diameter [mm]: | 67 mm |
| Outer Diameter [mm]: | 83 mm |
| Inner Diameter 1 [mm]: | 67 mm |
| Outer Diameter 1 [mm]: | 83 mm |
| Material: | ACM (Polyacrylate) |
| For OE number: | 02D525596 |
| Swirl Type: | Alternating Twist |
| Dust Cover: | with dust lip |
General information
| Code: | NUP-WW-028 |
| Brand: | NTY |
| Title: | Shaft Seal, differential |
| Car: | VW |
Criteria
| Fitting Position: | both sides |
| Outer Diameter [mm]: | 63 mm |
| Inner Diameter [mm]: | 39 mm |
| Thickness [mm]: | 9 mm |
| Material: | FPM (fluoride rubber) |
| Swirl Type: | Alternating Twist |
| Dust Cover: | with dust lip |
General information
| Code: | 81-34819-00 |
| Brand: | VICTOR REINZ |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Material: | PTFE (polytetrafluoroethylene) |
| Material: | ACM (Polyacrylate) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Inner Diameter [mm]: | 85 mm |
| Outer Diameter [mm]: | 105 mm |
| Height [mm]: | 11 mm |
| Radial Shaft Seal Design: | A SL |
| Swirl Type: | Left-hand Twist |

