HONDA CR-V III (RE_) 2.0 i-VTEC 4WD (RE5, RE2)
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
HONDA CR-V III (RE_) 2.0 i-VTEC 4WD (RE5, RE2)
Choose a car by KBA.
HONDA CR-V III (RE_) 2.0 i-VTEC 4WD (RE5, RE2)
Choose an engine.
Sealing ring HONDA CR-V III (RE_) 2.0 i-VTEC 4WD (RE5, RE2)
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for HONDA CR-V III (RE_) 2.0 i-VTEC 4WD (RE5, RE2). K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a HONDA CR-V III (RE_) 2.0 i-VTEC 4WD (RE5, RE2), we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
General information
| Code: | 590.797 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | OPEL |
Criteria
| Inner Diameter [mm]: | 80 mm |
| Outer Diameter [mm]: | 98 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | A/BS |
| Swirl Type: | Left-hand Twist |
| Material: | FPM (fluoride rubber) |
| Dust Cover: | with dust lip |
| Goods tariff number: | 8484200000 |
| Warehouse: | 1 pcs |
General information
| Code: | FE05099 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | OPEL |
Criteria
| Thickness [mm]: | 10 mm |
| Inner Diameter [mm]: | 80 mm |
| Outer Diameter [mm]: | 98 mm |
| Material: | MVQ (silicone rubber) |
| Fitting Position: | transmission sided |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
| Warehouse: | 9 pcs | |
| Supplier: | > 9 pcs |
General information
| Code: | FE184125 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, injector |
| Car: | BMW |
Criteria
| Thickness [mm]: | 3,5 mm |
| Inner Diameter [mm]: | 7,52 mm |
| Material: | FPM (fluoride rubber) |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | NUP-HD-002 |
| Brand: | NTY |
| Title: | Shaft Seal, differential |
| Car: | HONDA |
Criteria
| Fitting Position: | Rear Axle |
| Fitting Position: | Left |
General information
| Code: | NUP-HD-008 |
| Brand: | NTY |
| Title: | Shaft Seal, manual transmission |
| Car: | HONDA |
Criteria
| Outer Diameter [mm]: | 58 mm |
| Inner Diameter [mm]: | 35 mm |
| Thickness [mm]: | 8 mm |
General information
| Code: | 459.360 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | HONDA |
Criteria
| Inner Diameter [mm]: | 43 mm |
| Outer Diameter [mm]: | 58 mm |
| Height [mm]: | 7 mm |
| Radial Shaft Seal Design: | AS |
| Swirl Type: | Right-hand Twist |
| Material: | FPM (fluoride rubber) |
| Dust Cover: | with dust lip |
| Goods tariff number: | 8484200000 |
| Warehouse: | 0 pcs | |
| Supplier: | Check |
General information
| Code: | 466.042 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | MERCEDES |
Criteria
| Inner Diameter [mm]: | 43 mm |
| Outer Diameter [mm]: | 58 mm |
| Height [mm]: | 7 mm |
| Radial Shaft Seal Design: | AW/B |
| Swirl Type: | Right-hand Twist |
| Material: | FPM (fluoride rubber) |
| Dust Cover: | without dust lip |
| Warehouse: | 0 pcs | |
| Supplier: | Check |
General information
| Code: | NUP-HD-001 |
| Brand: | NTY |
| Title: | Shaft Seal, manual transmission |
| Car: | HONDA |
Criteria
| Outer Diameter [mm]: | 56 mm |
| Inner Diameter [mm]: | 40 mm |
| Thickness [mm]: | 8 mm |