SEAT TOLEDO I (1L2) 1.8 GT
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
SEAT TOLEDO I (1L2) 1.8 GT
Choose a car by KBA.
SEAT TOLEDO I (1L2) 1.8 GT
Choose an engine.
Other SEAT TOLEDO I (1L2) 1.8 GT 102 kW
K MOTORSHOP offers our customers a comprehensive portfolio of OTHER for SEAT TOLEDO I (1L2) 1.8 GT 102 kW. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a OTHER for a SEAT TOLEDO I (1L2) 1.8 GT 102 kW, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
| Warehouse: | 8 pcs | |
| Supplier: | > 9 pcs |
General information
| Code: | FE03168 |
| Brand: | FEBI BILSTEIN |
| Title: | Bush, starter shaft |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 14 mm |
| Inner Diameter [mm]: | 11 mm |
| Outer Diameter [mm]: | 13,6 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
| Warehouse: | 10 pcs | |
| Supplier: | > 9 pcs |
General information
| Code: | 0332201107 |
| Brand: | BOSCH |
| Title: | Relay, glow plug system |
| Car: | ŠKODA-VW |
Criteria
| Current Strength [A]: | 30 A |
| Voltage [V]: | 12 V |
| Number of pins: | 5 -pin connector |
| Relay function: | Normally open contact |
| Switch Function: | Normally Open Contact |
| Temperature range from [°C]: | -40 °C |
| Temperature range to [°C]: | 100 °C |
| Resistor [ohm]: | 16 Ohm |
General information
| Code: | 0438170027 |
| Brand: | BOSCH |
| Title: | Pressure Accumulator, fuel pressure |
| Car: | VW |
Criteria
| Diameter [mm]: | 83 mm |
| Length [mm]: | 140 mm |
| Material: | Sheet Steel |
| Surface: | Chrome-(VI)- free passivation |
| Surface: | Zinc-coated |
| Foreflow/Backflow: | without backflow |
| Pressure to [bar]: | 1,8 bar |
| Connecting Thread 1: | M16x1,5 |
| Connecting Thread 2: | M14x1,5 |

