BMW Z4 Coupe (E86) 3.0 si
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
BMW Z4 Coupe (E86) 3.0 si
Choose a car by KBA.
BMW Z4 Coupe (E86) 3.0 si
Choose an engine.
Sealing ring BMW Z4 Coupe (E86) 3.0 si
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for BMW Z4 Coupe (E86) 3.0 si. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a BMW Z4 Coupe (E86) 3.0 si, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
General information
| Code: | 257.400 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | BMW |
Criteria
| Inner Diameter [mm]: | 65 mm |
| Outer Diameter [mm]: | 79 mm |
| Height [mm]: | 20 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 6 pcs |
General information
| Code: | 751.610 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | BMW |
Criteria
| Inner Diameter [mm]: | 90 mm |
| Outer Diameter [mm]: | 110 mm |
| Height [mm]: | 8 mm |
| Radial Shaft Seal Design: | AW OF |
| Swirl Type: | Left-hand Twist |
| Material: | FPM (fluoride rubber) |
| Dust Cover: | without dust lip |
| Warehouse: | 3 pcs |
General information
| Code: | FE184125 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, injector |
| Car: | BMW |
Criteria
| Thickness [mm]: | 3,5 mm |
| Inner Diameter [mm]: | 7,52 mm |
| Material: | FPM (fluoride rubber) |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE47566 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | BMW |
Criteria
| Width [mm]: | 20 mm |
| Inner Diameter [mm]: | 65 mm |
| Outer Diameter [mm]: | 79 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Material: | PP (Polypropylene) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Fitting Position: | frontal sided |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | B17.540 |
| Brand: | ELRING |
| Title: | Shaft Seal, automatic transmission flange |
| Car: | CHRYSLER |
Criteria
| Inner Diameter [mm]: | 44 mm |
| Outer Diameter [mm]: | 72 mm |
| Height [mm]: | 8 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Left-hand Twist |
| Material: | AEM (Ethylene Acrylate Rubber) |
| Dust Cover: | with dust lip |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | 01033294B |
| Brand: | CORTECO |
| Title: | Shaft Seal, differential |
| Car: | BMW |
Criteria
| Fitting Position: | Rear Axle |
| Height [mm]: | 10 mm |
| Height 1 [mm]: | 15,5 mm |
| Inner Diameter [mm]: | 44 mm |
| Outer Diameter [mm]: | 90 mm |
| Material: | ACM (Polyacrylate) |
| Swirl Type: | Alternating Twist |
| Dust Cover: | with dust lip |
General information
| Code: | FE182903 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, injector |
| Car: | BMW |
Criteria
| Thickness [mm]: | 3,1 mm |
| Inner Diameter [mm]: | 8,5 mm |
| Material: | FPM (fluoride rubber) |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | NUP-BM-005 |
| Brand: | NTY |
| Title: | Shaft Seal, crankshaft |
| Car: | BMW |
Criteria
| Fitting Position: | frontal sided |
| Observe assembly information: | yes |
| Height [mm]: | 20 mm |
| Outer Diameter [mm]: | 79 mm |
| Inner Diameter [mm]: | 65 mm |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Swirl Type: | Right-hand Twist |
| Dust Cover: | with dust lip |

