FORD MONDEO III Turnier (BWY) 2.2 TDCi
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
FORD MONDEO III Turnier (BWY) 2.2 TDCi
Choose a car by KBA.
FORD MONDEO III Turnier (BWY) 2.2 TDCi
Choose an engine.
Inlet valve FORD MONDEO III Turnier (BWY) 2.2 TDCi
K MOTORSHOP offers our customers a comprehensive portfolio of INLET VALVE for FORD MONDEO III Turnier (BWY) 2.2 TDCi. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a INLET VALVE for a FORD MONDEO III Turnier (BWY) 2.2 TDCi, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
General information
| Code: | VI0041 |
| Brand: | ET ENGINETEAM |
| Title: | Intake Valve |
| Car: | Ford Mondeo/Transit 2,0/2,2/2,4TDC 1998-2014 |
Criteria
| Supplementary Article/Supplementary Info 2: | Chromed valve stem |
| Length [mm]: | 122,2 mm |
| Valve Stem Diameter [mm]: | 7 mm |
| Valve Head Diameter [mm]: | 29,8 mm |
| Material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 30 ° |
| Warehouse: | > 25 pcs | |
| Supplier: | > 25 pcs |
General information
| Code: | FE199048 |
| Brand: | FEBI BILSTEIN |
| Title: | Intake Valve |
| Car: | FORD |
Criteria
| Length [mm]: | 122,3 mm |
| Valve Head Diameter [mm]: | 29,73 mm |
| Valve Stem Diameter [mm]: | 5,24 mm |
| Notches/Holes Number: | 3 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | R6145/SCR |
| Brand: | FRECCIA |
| Title: | Intake Valve |
| Car: | FORD |
Criteria
| Supplementary Article/Supplementary Info 2: | Chromed valve stem |
| Length [mm]: | 122,2 mm |
| Valve Stem Diameter [mm]: | 7 mm |
| Valve Head Diameter [mm]: | 29,8 mm |
| Material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 30 ° |
| Connector type: | I |
General information
| Code: | 181018 |
| Brand: | TRW Engine Component |
| Title: | Intake Valve |
| Car: | FORD |
Criteria
| Valve Head Diameter [mm]: | 29,8 mm |
| Valve Stem Diameter [mm]: | 7 mm |
| Length [mm]: | 122,2 mm |
| Material: | Chrome-silicon-steel |
| Supplementary Article/Supplementary Info 2: | Chromed valve stem |
| Valve seat angle [°]: | 30 ° |
| Supplementary Article/Supplementary Info 2: | Valve stem tip hardened |
General information
| Code: | 013VE31276000 |
| Brand: | MAHLE |
| Title: | Intake Valve |
| Car: | FORD |
Criteria
| Fitting Position: | Intake Side |
| Valve Head Diameter [mm]: | 29,8 mm |
| Valve Stem Diameter [mm]: | 7,0 mm |
| Valve seat angle [°]: | 30,0 ° |
| Length [mm]: | 122,2 mm |
| Valve Seat Material: | Chrome-silicon-steel |
| Surface: | Chromed |
| Packaging height [cm]: | 14,00 cm |
| Packaging length [cm]: | 4,2 cm |
| Packaging width [cm]: | 4,20 cm |
| Net Weight [g]: | 56 g |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | V94378 |
| Brand: | AE |
| Title: | Intake Valve |
| Car: | FORD |
Criteria
| Supplementary Article/Supplementary Info 2: | Chromed valve stem |
| Supplementary Article/Supplementary Info 2: | Hardened valve seat |
| Supplementary Article/Supplementary Info 2: | Valve stem tip hardened |
| Length [mm]: | 122,2 mm |
| Valve Stem Diameter [mm]: | 7 mm |
| Valve Head Diameter [mm]: | 29,8 mm |
| Material: | Bi-metal |
| Material: | Chrome-Mangan-Nickel Steel |
| Valve stem material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 30 ° |