SKODA OCTAVIA II Combi (1Z5) 1.6 FSI
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
SKODA OCTAVIA II Combi (1Z5) 1.6 FSI
Choose a car by KBA.
SKODA OCTAVIA II Combi (1Z5) 1.6 FSI
Choose an engine.
Sealing ring SKODA OCTAVIA II Combi (1Z5) 1.6 FSI
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for SKODA OCTAVIA II Combi (1Z5) 1.6 FSI. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a SKODA OCTAVIA II Combi (1Z5) 1.6 FSI, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
| Warehouse: | > 25 pcs |
General information
| Code: | 155.560 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 48 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Observe assembly information: | yes |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | > 25 pcs |
General information
| Code: | FE178771 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | VW |
Criteria
| Width [mm]: | 16,8 mm |
| Inner Diameter [mm]: | 85 mm |
| Outer Diameter [mm]: | 131 mm |
| Outer Diameter 1 [mm]: | 152 mm |
| Fitting Position: | transmission sided |
| Supplementary Article/Supplementary Info 2: | with flange |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE32471 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 10 mm |
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 48 mm |
| Fitting Position: | frontal sided |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE37763 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 85 mm |
| Fitting Position: | transmission sided |
| Supplementary Article/Supplementary Info 2: | with flange |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | 376.730 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Observe assembly information: | yes |
| Inner Diameter [mm]: | 85 mm |
| Radial Shaft Seal Design: | IWD |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene) |
| Housing Type: | with housing |
| Housing Type: | Housing with Aluminium Lid |
| Article Number of the recommended special tool: | T10017 |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Goods tariff number: | 8409919990 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | 429.090 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Observe assembly information: | yes |
| Inner Diameter [mm]: | 85 mm |
| Swirl Type: | Left-hand Twist |
| Radial Shaft Seal Design: | IWD |
| Material: | PTFE (polytetrafluoroethylene) |
| Housing Type: | with housing |
| Housing Type: | Housing with Plastic Lid |
| Article Number of the recommended special tool: | T10134 |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |

