AUDI Q5 (GUB) 3.0 TDI quattro
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
AUDI Q5 (GUB) 3.0 TDI quattro
Choose a car by KBA.
AUDI Q5 (GUB) 3.0 TDI quattro
Choose an engine.
Sealing ring AUDI Q5 (GUB) 3.0 TDI quattro
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for AUDI Q5 (GUB) 3.0 TDI quattro. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a AUDI Q5 (GUB) 3.0 TDI quattro, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
General information
| Code: | 219.950 |
| Brand: | ELRING |
| Title: | Seal Ring |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 16,2 mm |
| Outer Diameter [mm]: | 19,2 mm |
| Thickness [mm]: | 1,5 mm |
| Material: | FPM (fluoride rubber) |
| Cross-Sectional Form: | O-Ring |
| Goods tariff number: | 3926904510 |
| Goods tariff number: | 3926909985 |
| Warehouse: | > 25 pcs |
General information
| Code: | 263.600 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | MAN |
Criteria
| Inner Diameter [mm]: | 55 mm |
| Outer Diameter [mm]: | 70 mm |
| Height [mm]: | 8 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 3 pcs |
General information
| Code: | 026.790 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | Audi Bentley Citroën Cupra Fiat Ford KTM Lamborghini Mazda Mercury Marine Mini Mitsubishi Opel Peugeot Porsche Santana Suzuki Škoda-VW Toyota Volvo Volkswagen |
Criteria
| Inner Diameter [mm]: | 85 mm |
| Outer Diameter [mm]: | 105 mm |
| Height [mm]: | 8,8 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | 302 172 |
| Brand: | TOPRAN |
| Title: | Shaft Seal, crankshaft |
| Tag: | EHVP |
| Car: | FORD |
Criteria
| Inner Diameter [mm]: | 85 mm |
| Outer Diameter [mm]: | 105 mm |
| Height [mm]: | 8,8 mm |
| Fitting Position: | transmission sided |
| Dust Cover: | with dust lip |
| Material: | PTFE (polytetrafluoroethylene) |
| Swirl Type: | Left-hand Twist |
| General Information: | Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty. |

