AUDI A8 D2 (4D2, 4D8) 6.0 W12 quattro
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
AUDI A8 D2 (4D2, 4D8) 6.0 W12 quattro
Choose a car by KBA.
AUDI A8 D2 (4D2, 4D8) 6.0 W12 quattro
Choose an engine.
Sealing ring AUDI A8 D2 (4D2, 4D8) 6.0 W12 quattro
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for AUDI A8 D2 (4D2, 4D8) 6.0 W12 quattro. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a AUDI A8 D2 (4D2, 4D8) 6.0 W12 quattro, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
General information
| Code: | 158.430 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 85 mm |
| Outer Diameter [mm]: | 105 mm |
| Height [mm]: | 11 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 3 pcs |
General information
| Code: | FE01090 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 11 mm |
| Inner Diameter [mm]: | 85 mm |
| Outer Diameter [mm]: | 105 mm |
| Material: | FPM (fluoride rubber) |
| Fitting Position: | transmission sided |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE46155 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 11 mm |
| Inner Diameter [mm]: | 85 mm |
| Outer Diameter [mm]: | 105 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Fitting Position: | transmission sided |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | NUP-WW-002 |
| Brand: | NTY |
| Title: | Shaft Seal, drive shaft |
| Car: | VW |
Criteria
| Outer Diameter [mm]: | 80 mm |
| Inner Diameter [mm]: | 60 mm |
| Thickness [mm]: | 7,5 mm |
General information
| Code: | 655.340 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 42 mm |
| Outer Diameter [mm]: | 55 mm |
| Height [mm]: | 7 mm |
| Radial Shaft Seal Design: | AW/BS |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 0 pcs | |
| Supplier: | Check |