Search by vehicle
Search by KBA
Search by engine
GENESIS GV80 SUV (JX1) 3.0 CRDi AWD
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
GENESIS GV80 SUV (JX1) 3.0 CRDi AWD
Choose a car by KBA.
GENESIS GV80 SUV (JX1) 3.0 CRDi AWD
Choose an engine.
View search
Hide search
Spare parts GENESIS GV80 SUV (JX1) 3.0 CRDi AWD
General information
| Code: | 7.14060.09.0 |
| Brand: | PIERBURG |
| Title: | Wheel Sensor, tyre-pressure monitoring system |
Criteria
| Frequency Range [MHz]: | 433 MHz |
General information
| Code: | 0445010869 |
| Brand: | BOSCH |
| Title: | High-pressure Pump |
Criteria
| Fuel Type: | Diesel |
General information
| Code: | 1986AD3133 |
| Brand: | BOSCH |
| Title: | Dryer, air conditioning |
| Car: | HYUNDAI |
Criteria
| Diameter [mm]: | 20 mm |
| Refrigerant: | R 1234yf |
| Refrigerant: | R 134a |
| Supplementary Article/Supplementary Info 2: | with seal ring |
Show all
Show less
General information
| Code: | F00VP01004 |
| Brand: | BOSCH |
| Title: | Seal Ring, nozzle holder |
| Car: | ŠKODA-VW |
Criteria
| Fuel Mixture Formation: | Common Rail (CR) |
General information
| Code: | FE101930 |
| Brand: | FEBI BILSTEIN |
| Title: | Alternator Freewheel Clutch |
| Car: | HYUNDAI |
Criteria
| Width [mm]: | 39,3 mm |
| Inner Diameter [mm]: | 17 mm |
| Outer Diameter [mm]: | 55 mm |
| Tightening Torque [Nm]: | 85 Nm |
| Number of ribs: | 7 |
| Supplementary Article/Supplementary Info 2: | with cover |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE188618 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, radiator |
| Car: | KIA |
Criteria
| Thickness [mm]: | 23 mm |
| Inner Diameter [mm]: | 12 mm |
| Fitting Position: | Lower |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194278 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | HYUNDAI |
Criteria
| Length [mm]: | 33 mm |
| Outer Diameter [mm]: | 22,7 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 23 mm |
| Spanner Size: | 17 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Screw length below head [mm]: | 23 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194281 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | HYUNDAI |
Criteria
| Length [mm]: | 33 mm |
| Outer Diameter [mm]: | 23 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 23 mm |
| Spanner Size: | 17 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Screw length below head [mm]: | 23 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194284 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | HYUNDAI |
Criteria
| Length [mm]: | 33 mm |
| Outer Diameter [mm]: | 22,7 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 23 mm |
| Spanner Size: | 17 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Screw length below head [mm]: | 23 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194288 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | HYUNDAI |
Criteria
| Inner Diameter [mm]: | 14,4 mm |
| Height [mm]: | 2 mm |
| Outer Diameter [mm]: | 22 mm |
| Material: | Aluminium |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less