Search by vehicle
Search by KBA
Search by engine
VAUXHALL INSIGNIA Mk I (A) Saloon (G09) 1.6 SIDI
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
VAUXHALL INSIGNIA Mk I (A) Saloon (G09) 1.6 SIDI
Choose a car by KBA.
VAUXHALL INSIGNIA Mk I (A) Saloon (G09) 1.6 SIDI
Choose an engine.
View search
Hide search
Spare parts VAUXHALL INSIGNIA Mk I (A) Saloon (G09) 1.6 SIDI
General information
| Code: | 50056147 |
| Brand: | KOLBENSCHMIDT |
| Title: | Camshaft Adjuster, VVT hub |
| Car: | OPEL |
Criteria
| Number of Teeth: | 52 |
General information
| Code: | 7.04590.07.0 |
| Brand: | PIERBURG |
| Title: | Boost Pressure Control Valve |
Criteria
| Valve Type: | Switch Valve |
| Operating Mode: | Electric-pneumatic |
| Voltage [V]: | 12 V |
| Supplementary Article/Supplementary Info: | with hose |
| Supplementary Article/Supplementary Info 2: | without bolts/screws |
Show all
Show less
General information
| Code: | 7.07759.80.0 |
| Brand: | PIERBURG |
| Title: | Mass Air Flow Sensor |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12 V |
General information
| Code: | 7.14060.31.0 |
| Brand: | PIERBURG |
| Title: | Wheel Sensor, tyre-pressure monitoring system |
Criteria
| Frequency Range [MHz]: | 433 MHz |
General information
| Code: | 350203062560 |
| Brand: | MAGNETI MARELLI |
| Title: | Filter, cabin air |
| Car: | OPEL |
Criteria
| Width [mm]: | 205 mm |
| Height [mm]: | 35 mm |
| Length [mm]: | 240 mm |
| Filter type: | Filter Insert |
| Filter type: | Particulate Filter |
| Height 1 [mm]: | mm |
Show all
Show less
General information
| Code: | FE176254 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | OPEL |
Criteria
| Length [mm]: | 29 mm |
| Outer Diameter [mm]: | 26 mm |
| External Thread Size: | M12 x 1,75 |
| Thread Length [mm]: | 18 mm |
| Quality/ Grade: | 5.8 |
| Spanner Size: | T45 |
| Bolt Head-/Nut Design: | Female Torx |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 18 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE178311 |
| Brand: | FEBI BILSTEIN |
| Title: | Auxiliary Water Pump (cooling water circuit) |
| Car: | OPEL |
Criteria
| Voltage [V]: | 12 V |
| Number of connectors: | 3 |
| Operating Mode: | Electric |
| Supplementary Article/Supplementary Info: | with holder |
| Supplementary Article/Supplementary Info 2: | with heating hoses |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE181970 |
| Brand: | FEBI BILSTEIN |
| Title: | Mass Air Flow Sensor |
| Car: | OPEL |
Criteria
| Resistor Type: | Hot-film Sensor |
| Number of connectors: | 8 |
| Housing Type: | without housing |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE186314 |
| Brand: | FEBI BILSTEIN |
| Title: | Hydraulic Filter, automatic transmission |
| Car: | OPEL |
Criteria
| Transmission Type: | 6-Speed Automatic Transmission |
| Filter type: | Screen Filter |
| Length [mm]: | 198 mm |
| Width [mm]: | 143 mm |
| Height [mm]: | 61 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE188395 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, radiator |
| Car: | OPEL |
Criteria
| Inner Diameter [mm]: | 12 mm |
| Outer Diameter [mm]: | 42 mm |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less