Search by vehicle
Search by KBA
Search by engine
TESLA MODEL S EV AWD
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
TESLA MODEL S EV AWD
Choose a car by KBA.
TESLA MODEL S EV AWD
Choose an engine.
View search
Hide search
Spare parts TESLA MODEL S EV AWD
General information
| Code: | 7.07223.08.0 |
| Brand: | PIERBURG |
| Title: | Water Pump, engine cooling |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12,5 V |
| Diameter 1 [mm]: | 21 mm |
| Diameter 2 [mm]: | 21 mm |
| Water pump impeller material: | Plastic |
| Signal type: | PWM |
| Total Width [mm]: | 65 mm |
| Supplementary Article/Supplementary Info: | with holder |
Show all
Show less
General information
| Code: | 7.07224.01.0 |
| Brand: | PIERBURG |
| Title: | Auxiliary Water Pump (cooling water circuit) |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12,5 V |
| Diameter 1 [mm]: | 21 mm |
| Supplementary Article/Supplementary Info 2: | with bolts/screws |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Water pump impeller material: | Plastic |
| Total Width [mm]: | 68 mm |
| Signal type: | PWM |
Show all
Show less
General information
| Code: | 7.14848.00.0 |
| Brand: | PIERBURG |
| Title: | Pressure Switch, air conditioning |
Criteria
| Plug Type: | Male |
| Plug Type ID: | AMP #1-967640-1 |
| Thread Type: | with metric thread |
| Voltage [V]: | 12 V |
| Pressure [bar]: | 11 bar |
| Thread Size: | M12 X 1.25-6g |
| Connector Shape: | oval |
| Number of pins: | 4 -pin connector |
| Refrigerant: | R 134a |
| Refrigerant: | R 1234yf |
Show all
Show less
General information
| Code: | 7.14848.01.0 |
| Brand: | PIERBURG |
| Title: | Pressure Switch, air conditioning |
Criteria
| Plug Type: | Male |
| Plug Type ID: | AMP #1-967640-1 |
| Thread Type: | with metric thread |
| Voltage [V]: | 5 V |
| Pressure [bar]: | 36 bar |
| Thread Size: | M12 X 1.25-6g |
| Connector Shape: | oval |
| Number of pins: | 4 -pin connector |
| Refrigerant: | R 134a |
Show all
Show less
General information
| Code: | FE194303 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter, transmission (E-axle) |
| Car: | TESLA |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 88,4 mm |
| Outer Diameter [mm]: | 65,4 mm |
| Internal Thread Size: | M20 x 1,5 |
| Supplementary Article/Supplementary Info 3: | without bypass valve |
| Gasket inside diameter [mm]: | 53,9 mm |
| Gasket outside diameter [mm]: | 62,3 mm |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE196216 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, electric motor (E-axle) |
| Car: | TESLA |
Criteria
| Fitting Position: | Rear Axle |
| Mounting Type: | Rubber-Metal Mount |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | 7.07223.09.0 |
| Brand: | PIERBURG |
| Title: | Water Pump, engine cooling |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12,5 V |
| Diameter 1 [mm]: | 21 mm |
| Diameter 2 [mm]: | 21 mm |
| Water pump impeller material: | Plastic |
| Signal type: | PWM |
| Total Width [mm]: | 65 mm |
| Supplementary Article/Supplementary Info: | with holder |
| Supplementary Article/Supplementary Info: | Housing with cooling fins |
Show all
Show less

