Search by vehicle
Search by KBA
Search by engine
MAZDA RX-8 (SE, FE) 1.3 (FE103, SE3P)
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA RX-8 (SE, FE) 1.3 (FE103, SE3P)
Choose a car by KBA.
MAZDA RX-8 (SE, FE) 1.3 (FE103, SE3P)
Choose an engine.
View search
Hide search
Spare parts MAZDA RX-8 (SE, FE) 1.3 (FE103, SE3P)
General information
| Code: | 7.28342.24.0 |
| Brand: | PIERBURG |
| Title: | Mass Air Flow Sensor |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12 V |
General information
| Code: | 0258986602 |
| Brand: | BOSCH |
| Title: | Oxygen Sensor |
| Car: | ŠKODA-VW |
Criteria
| Number of circuits: | 4 |
| Recommended change interval [km]: | 160000 km |
| Connector/Clamp: | Connector may need adjustment |
Show all
Show less
General information
| Code: | 1987474321 |
| Brand: | BOSCH |
| Title: | Accessory Kit, disc brake pad |
| Car: | TOYOTA |
General information
| Code: | 1987474381 |
| Brand: | BOSCH |
| Title: | Accessory Kit, disc brake pad |
| Car: | SUZUKI |
General information
| Code: | ECX-TY-006 |
| Brand: | NTY |
| Title: | Mounting, axle strut |
| Car: | TOYOTA/ SUBARU/ RENAULT/ NISSAN/ MITSUBISHI/ MAZDA/ LEXUS/ HONDA /KIT NAPRAWCZY/ |
General information
| Code: | EFR-MZ-007 |
| Brand: | NTY |
| Title: | Regulating Valve, oil pressure |
| Car: | MAZDA |
Criteria
| Number of pins: | 2 -pin connector |
General information
| Code: | F026400362 |
| Brand: | BOSCH |
| Title: | Air Filter |
| Car: | MAZDA |
Criteria
| Filter type: | Filter Insert |
| Length [mm]: | 228 mm |
| Width [mm]: | 374,5 mm |
| Height [mm]: | 48 mm |
Show all
Show less
General information
| Code: | F026407210 |
| Brand: | BOSCH |
| Title: | Oil Filter |
| Car: | FORD |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 67 mm |
| Thread Size: | M 20 x 1,5 |
| Outer Diameter [mm]: | 66 mm |
| Gasket outside diameter [mm]: | 63 mm |
| Gasket inside diameter [mm]: | 53 mm |
| Bypass Valve Opening Pressure [bar]: | 1,4 bar |
| Supplementary Article/Supplementary Info 2: | with one anti-return valve |
| Quantity: | 1 |
Show all
Show less
General information
| Code: | FE108251 |
| Brand: | FEBI BILSTEIN |
| Title: | Ignition Coil |
| Car: | MAZDA |
Criteria
| Number of connectors: | 3 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE180282 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MAZDA |
Criteria
| Length [mm]: | 18 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 10 mm |
| Spanner Size: | 19 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 10 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less