VW POLO III CLASSIC (6V2) 110 1.9 TDI
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
VW POLO III CLASSIC (6V2) 110 1.9 TDI
Choose a car by KBA.
VW POLO III CLASSIC (6V2) 110 1.9 TDI
Choose an engine.
Sealing ring VW POLO III CLASSIC (6V2) 110 1.9 TDI
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for VW POLO III CLASSIC (6V2) 110 1.9 TDI. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a VW POLO III CLASSIC (6V2) 110 1.9 TDI, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
General information
| Code: | TM0018 |
| Brand: | ET ENGINETEAM |
| Title: | Shaft Seal, camshaft |
| Car: | Audi Seat Skoda VW A4 Alhambra Octavia Caddy II AEE AEY 1,4 1,9 TDI 2000+ |
Criteria
| Fitting Position: | frontal sided |
| Outer Diameter [mm]: | 47 mm |
| Inner Diameter [mm]: | 32 mm |
| Material: | FPM (fluoride rubber)/ACM (polyacrylate rubber) |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Alternating Twist |
| Dust Cover: | with dust lip |
| Warehouse: | > 25 pcs |
| Warehouse: | > 25 pcs |
General information
| Code: | 012.370 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 85 mm |
| Radial Shaft Seal Design: | IWD |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Housing Type: | with housing |
| Observe assembly information: | yes |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 5 pcs |
General information
| Code: | 155.560 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 48 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Observe assembly information: | yes |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | > 25 pcs |
General information
| Code: | 325.155 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 32 mm |
| Outer Diameter [mm]: | 47 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Alternating Twist |
| Material: | FPM (fluoride rubber)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Alternative Repair Kit: | 325.156 |
| Goods tariff number: | 8484200000 |
| Warehouse: | 25 pcs |
General information
| Code: | 567.510 |
| Brand: | ELRING |
| Title: | Shaft Seal, differential |
| Car: | VW |
Criteria
| Inner Diameter [mm]: | 48 mm |
| Outer Diameter [mm]: | 62 mm |
| Height [mm]: | 8 mm |
| Radial Shaft Seal Design: | A/BS |
| Swirl Type: | Alternating Twist |
| Material: | ACM (Polyacrylate) |
| Dust Cover: | with dust lip |
| Warehouse: | 11 pcs |
General information
| Code: | FE15926 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, injector |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 2,5 mm |
| Inner Diameter [mm]: | 7,5 mm |
| Outer Diameter [mm]: | 13 mm |
| Material: | Copper |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
| Warehouse: | 6 pcs | |
| Supplier: | > 9 pcs |
General information
| Code: | FE01090 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 11 mm |
| Inner Diameter [mm]: | 85 mm |
| Outer Diameter [mm]: | 105 mm |
| Material: | FPM (fluoride rubber) |
| Fitting Position: | transmission sided |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE02085 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 10 mm |
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 48 mm |
| Material: | ACM (Polyacrylate) |
| Fitting Position: | frontal sided |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE03598 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 10 mm |
| Inner Diameter [mm]: | 32 mm |
| Outer Diameter [mm]: | 47 mm |
| Material: | FPM (fluoride rubber) |
| Fitting Position: | frontal sided |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |

