DACIA LOGAN MCV II 1.5 dCi
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
DACIA LOGAN MCV II 1.5 dCi
Choose a car by KBA.
DACIA LOGAN MCV II 1.5 dCi
Choose an engine.
Sealing ring DACIA LOGAN MCV II 1.5 dCi
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for DACIA LOGAN MCV II 1.5 dCi. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a DACIA LOGAN MCV II 1.5 dCi, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
General information
| Code: | 431.420 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | RENAULT |
Criteria
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 47 mm |
| Height [mm]: | 7 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 1 pcs |
General information
| Code: | 745.740 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | SMART |
Criteria
| Inner Diameter [mm]: | 80 mm |
| Outer Diameter [mm]: | 100 mm |
| Height [mm]: | 9 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 3 pcs |
General information
| Code: | FE194704 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | DACIA |
Criteria
| Width [mm]: | 100 mm |
| Inner Diameter [mm]: | 78,3 mm |
| Outer Diameter [mm]: | 100,2 mm |
| Fitting Position: | transmission sided |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | 073.890 |
| Brand: | ELRING |
| Title: | Shaft Seal, camshaft |
| Car: | RENAULT |
Criteria
| Inner Diameter [mm]: | 28 mm |
| Outer Diameter [mm]: | 42 mm |
| Height [mm]: | 5 mm |
| Radial Shaft Seal Design: | AS |
| Swirl Type: | Right-hand Twist |
| Material: | FPM (fluoride rubber) |
| Dust Cover: | with dust lip |
| Goods tariff number: | 8484200000 |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | 162.320 |
| Brand: | ELRING |
| Title: | Shaft Seal, manual transmission |
| Car: | NISSAN |
Criteria
| Inner Diameter [mm]: | 24,5 mm |
| Outer Diameter [mm]: | 42 mm |
| Height [mm]: | 6 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Right-hand Twist |
| Material: | ACM (Polyacrylate) |
| Dust Cover: | with dust lip |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | 964.880 |
| Brand: | ELRING |
| Title: | Shaft Seal, differential |
| Car: | RENAULT |
Criteria
| Inner Diameter [mm]: | 40 mm |
| Outer Diameter [mm]: | 55 mm |
| Height [mm]: | 8 mm |
| Height 2 [mm]: | 14 mm |
| Radial Shaft Seal Design: | A/BS |
| Swirl Type: | Alternating Twist |
| Material: | ACM (Polyacrylate) |
| Dust Cover: | with dust lip |
| Goods tariff number: | 8484200000 |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | 01033808B |
| Brand: | CORTECO |
| Title: | Shaft Seal, differential |
| Car: | RENAULT |
Criteria
| Fitting Position: | Outlet |
| Fitting Position: | Front Axle |
| Fitting Position: | Left |
| Height [mm]: | 8 mm |
| Height 1 [mm]: | 13 mm |
| Inner Diameter [mm]: | 40 mm |
| Outer Diameter [mm]: | 55 mm |
| Material: | ACM (Polyacrylate) |
| Swirl Type: | Alternating Twist |
| Dust Cover: | with dust lip |
General information
| Code: | 81-36957-00 |
| Brand: | VICTOR REINZ |
| Title: | Shaft Seal, crankshaft |
| Car: | RENAULT |
Criteria
| Material: | PTFE (polytetrafluoroethylene) |
| Material: | ACM (Polyacrylate) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 47 mm |
| Height [mm]: | 7 mm |
| Radial Shaft Seal Design: | A SL |
| Swirl Type: | Right-hand Twist |
General information
| Code: | 81-35051-00 |
| Brand: | VICTOR REINZ |
| Title: | Shaft Seal, crankshaft |
| Car: | RENAULT |
Criteria
| Material: | PTFE (polytetrafluoroethylene) |
| Material: | ACM (Polyacrylate) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Inner Diameter [mm]: | 80 mm |
| Outer Diameter [mm]: | 100 mm |
| Height [mm]: | 9 mm |
| Radial Shaft Seal Design: | A |
| Swirl Type: | Left-hand Twist |

