VW CRAFTER 30-35 Bus (2E_) 2.0 TDI
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
VW CRAFTER 30-35 Bus (2E_) 2.0 TDI
Choose a car by KBA.
VW CRAFTER 30-35 Bus (2E_) 2.0 TDI
Choose an engine.
Sealing ring VW CRAFTER 30-35 Bus (2E_) 2.0 TDI
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for VW CRAFTER 30-35 Bus (2E_) 2.0 TDI. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a VW CRAFTER 30-35 Bus (2E_) 2.0 TDI, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
| Warehouse: | > 25 pcs |
General information
| Code: | 155.560 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 48 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Observe assembly information: | yes |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | > 25 pcs |
General information
| Code: | 364.700 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Observe assembly information: | yes |
| Inner Diameter [mm]: | 85 mm |
| Radial Shaft Seal Design: | IWD |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Housing Type: | with housing |
| Article Number of the recommended special tool: | T10134 |
| Goods tariff number: | 8409919990 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 8 pcs |
General information
| Code: | FE32471 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 10 mm |
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 48 mm |
| Fitting Position: | frontal sided |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE36383 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 17,3 mm |
| Inner Diameter [mm]: | 85 mm |
| Outer Diameter [mm]: | 131 mm |
| Outer Diameter [mm]: | 152 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Material: | ACM (Polyacrylate) |
| Fitting Position: | transmission sided |
| Supplementary Article/Supplementary Info 2: | with flange |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE40108 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, camshaft |
| Car: | ŠKODA-VW |
Criteria
| Thickness [mm]: | 10 mm |
| Inner Diameter [mm]: | 32 mm |
| Outer Diameter [mm]: | 47 mm |
| Material: | ACM (Polyacrylate) |
| Fitting Position: | frontal sided |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE47276 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Width [mm]: | 10 mm |
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 48 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Fitting Position: | frontal sided |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | 897.690 |
| Brand: | ELRING |
| Title: | Shaft Seal, camshaft |
| Car: | ŠKODA-VW |
Criteria
| Inner Diameter [mm]: | 32 mm |
| Outer Diameter [mm]: | 47 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | AW |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | without dust lip |
| Observe assembly information: | yes |
| Goods tariff number: | 8484200000 |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 0 pcs | |
| Supplier: | Check |
General information
| Code: | 81-34366-00 |
| Brand: | VICTOR REINZ |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
Criteria
| Material: | PTFE (polytetrafluoroethylene) |
| Material: | ACM (Polyacrylate) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 48 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | A SL |
| Swirl Type: | Right-hand Twist |

