VW GOLF SPORTSVAN VII (AM1, AN1) 1.6
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
VW GOLF SPORTSVAN VII (AM1, AN1) 1.6
Choose a car by KBA.
VW GOLF SPORTSVAN VII (AM1, AN1) 1.6
Choose an engine.
Hydraulic tappet VW GOLF SPORTSVAN VII (AM1, AN1) 1.6
K MOTORSHOP offers our customers a comprehensive portfolio of HYDRAULIC TAPPET for VW GOLF SPORTSVAN VII (AM1, AN1) 1.6. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a HYDRAULIC TAPPET for a VW GOLF SPORTSVAN VII (AM1, AN1) 1.6, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
General information
| Code: | 50007667 |
| Brand: | KOLBENSCHMIDT |
| Title: | Tappet |
| Car: | Audi A3/Q3 Seat Mii Ibiza Leon Škoda-VW Citigo Fabia-III Rapid Octavia-III Volkswagen Polo UP Load Golf Jetta 1,0i/1,2TSI/1,4TSI CHPA CHPB CHYA CHYB CJZA CJZB CPGA CPDA Euro5/6 2013+ |
| Weight : | 0,02 kg |
Criteria
| Operating Mode: | hydraulic |
| Outer Diameter [mm]: | 12 mm |
| Fitting Position: | Exhaust Side |
| Fitting Position: | Intake Side |
General information
| Code: | FE47312 |
| Brand: | FEBI BILSTEIN |
| Title: | Tappet |
| Car: | ŠKODA-VW |
| Weight : | 0,02 kg |
Criteria
| Thickness [mm]: | 34,63 mm |
| Outer Diameter [mm]: | 12 mm |
| Operating Mode: | hydraulic |
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Weight [kg]: | 0,020 kg |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | PI 06-0056 |
| Brand: | FRECCIA |
| Title: | Tappet |
| Car: | ŠKODA-VW |
| Weight : | 0,02 kg |
Criteria
| Operating Mode: | hydraulic |
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
General information
| Code: | 85009000 |
| Brand: | AJUSA |
| Title: | Tappet |
| Car: | PEUGEOT |
| Weight : | 0,00 kg |
Criteria
| Operating Mode: | hydraulic |
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |