Search by vehicle
Search by KBA
Search by engine
CADILLAC ESCALADE 6.0 HYBRID
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
CADILLAC ESCALADE 6.0 HYBRID
Choose a car by KBA.
CADILLAC ESCALADE 6.0 HYBRID
Choose an engine.
View search
Hide search
Spare parts CADILLAC ESCALADE 6.0 HYBRID
General information
| Code: | 7.06740.24.0 |
| Brand: | PIERBURG |
| Title: | Auxiliary Water Pump (cooling water circuit) |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12 V |
General information
| Code: | 7.14060.22.0 |
| Brand: | PIERBURG |
| Title: | Wheel Sensor, tyre-pressure monitoring system |
Criteria
| Frequency Range [MHz]: | 433 MHz |
General information
| Code: | 000072330300 |
| Brand: | MAGNETI MARELLI |
| Title: | Wiper Blade |
Criteria
| Left-/right-hand drive vehicles: | for left-hand drive vehicles |
| Length [mm]: | 300 mm |
General information
| Code: | 0242230523 |
| Brand: | BOSCH |
| Title: | Spark Plug |
| Tag: | Double Iridium |
| Car: | CHEVROLET |
Criteria
| Electrode Gap [mm]: | 1,0 mm |
| Tightening Torque [Nm]: | 15 Nm |
| Thread Size: | M 14 x 1,25 |
| Thread Length [mm]: | 17,5 mm |
| Spanner Size: | 16 |
| Spark Position [mm]: | 5 mm |
| Number of pins: | 1 -pin connector |
Show all
Show less
General information
| Code: | 215810012000 |
| Brand: | MAGNETI MARELLI |
| Title: | Sensor, intake manifold pressure |
| Car: | OPEL |
General information
| Code: | 301191603640 |
| Brand: | MAGNETI MARELLI |
| Title: | Tie Rod End |
Criteria
| Fitting Position: | Front Axle |
| Rod/Strut: | Camber Link |
General information
| Code: | 3397118906 |
| Brand: | BOSCH |
| Title: | Wiper Blade |
| Tag: | Aerotwin Retrofit |
| Car: | AUDI |
Criteria
| Fitting Position: | Front |
| Quantity Unit: | Kit |
| Length 1 [mm]: | 550 mm |
| Length 2 [mm]: | 530 mm |
| Wiper blade type: | Flat wiper blade |
| Left-/right-hand drive vehicles: | for left-hand drive vehicles |
Show all
Show less
General information
| Code: | CPZ-CH-001 |
| Brand: | NTY |
| Title: | Auxiliary Water Pump (cooling water circuit) |
| Car: | CADILLAC ESCALADE 6.0 HYBRID 10-13, JAGUAR XK 98- /WITH BAND/ |
Criteria
| Voltage [V]: | 12 V |
| Operating Mode: | Electric |
General information
| Code: | CR4361SI |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | GM |
Criteria
| For shaft diameter from [mm]: | 53,31 mm |
| For shaft diameter from [inch]: | 2,099 Inch |
| For shaft diameter to [mm]: | 53,34 mm |
| For shaft diameter to [inch]: | 2,1 Inch |
| Standard Size [STD]: | yes |
| Thickness [inch]: | 0,062 Inch |
| Thickness [mm]: | 1,577 mm |
| For housing diameter from [mm]: | 56,51 mm |
| For housing diameter from [inch]: | 2,225 Inch |
| For housing diameter up to [mm]: | 56,52 mm |
| For housing diameter up to [inch]: | 2,225 Inch |
| Length [mm]: | 21,3 mm |
| Technical Information: | OE-Replacment version (Bi-Metal), 4 pairs |
Show all
Show less
General information
| Code: | CR4361SI 010 |
| Brand: | KING |
| Title: | Connecting Rod Bearing Shell |
| Car: | GM |
Criteria
| For shaft diameter from [mm]: | 53,056 mm |
| For shaft diameter from [inch]: | 2,089 Inch |
| For shaft diameter to [mm]: | 53,086 mm |
| For shaft diameter to [inch]: | 2,09 Inch |
| Undersize [inch]: | 0,01 Inch |
| Thickness [inch]: | 0,067 Inch |
| Thickness [mm]: | 1,704 mm |
| For housing diameter from [mm]: | 56,51 mm |
| For housing diameter from [inch]: | 2,225 Inch |
| For housing diameter up to [mm]: | 56,52 mm |
| For housing diameter up to [inch]: | 2,225 Inch |
| Length [mm]: | 21,3 mm |
| Technical Information: | OE-Replacment version (Bi-Metal), 4 pairs |
Show all
Show less