Search by vehicle
Search by KBA
Search by engine
RENAULT TRUCKS MIDLUM 270.15
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
RENAULT TRUCKS MIDLUM 270.15
Choose a car by KBA.
RENAULT TRUCKS MIDLUM 270.15
Choose an engine.
View search
Hide search
Spare parts RENAULT TRUCKS MIDLUM 270.15 198 kW
General information
| Code: | 92-59002 |
| Brand: | TRW Engine Component |
| Title: | Valve Seat Ring |
| Car: | Irisbus Iliade Mack Premium Renault Truck Midlum Kerax Premium Maxter MIDR06.20.45* MIDR06.20.56 DCi6* DCi11* dCi11* 1996+ |
Criteria
| Outer Diameter [mm]: | 44,043 mm |
| Inner Diameter [mm]: | 34,5 mm |
| Height [mm]: | 6,55 mm |
| Valve seat angle [°]: | 30 ° |
Show all
Show less
General information
| Code: | FE01754 |
| Brand: | FEBI BILSTEIN |
| Title: | Fuel Filter |
| Car: | MERCEDES |
Criteria
| Filter type: | Pre-Filter |
| Height [mm]: | 41 mm |
| Outer Diameter [mm]: | 50 mm |
| Supplementary Article/Supplementary Info: | with attachment/mounting material |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE02954 |
| Brand: | FEBI BILSTEIN |
| Title: | Tie Rod End |
| Tag: | ProKit |
| Car: | MERCEDES |
Criteria
| Length [mm]: | 120 mm |
| Outer Diameter [mm]: | 27 mm |
| Outer Diameter [mm]: | 70 mm |
| External Thread Size: | M24 x 1,5 |
| External Thread Size: | M30 x 1,5 RHT |
| Thread Length [mm]: | 85 mm |
| Spanner Size: | 36 |
| Thread Type: | with right-hand thread |
| Cone Size [mm]: | 30 mm |
| Colour: | grey |
| Material: | Steel |
| Rod/Strut: | Guide Rod |
| Fitting Position: | Rear Axle Left |
| Fitting Position: | Front Axle Left |
| Fitting Position: | Front Axle Right |
| Fitting Position: | Rear Axle Right |
| Pipe Diameter [mm]: | 40 mm |
| Supplementary Article/Supplementary Info: | with crown nut and split pin |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE09841 |
| Brand: | FEBI BILSTEIN |
| Title: | Pilot Bearing, clutch |
| Car: | SCANIA |
Criteria
| Thickness [mm]: | 15 mm |
| Inner Diameter [mm]: | 25 mm |
| Outer Diameter [mm]: | 52 mm |
| Bearing Type: | Grooved Ball Bearing |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE1001103 |
| Brand: | FEBI BILSTEIN |
| Title: | Hydraulic Filter Kit, automatic transmission |
| Car: | IVECO |
Criteria
| Transmission Type: | Automatic Transmission |
| Filter type: | Filter Insert |
| Inner Diameter [mm]: | 37 mm |
| Height [mm]: | 151 mm |
| Outer Diameter [mm]: | 81 mm |
| Supplementary Article/Supplementary Info: | with seal rings |
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE1003067 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, fuel level |
| Car: | RENAULT |
Criteria
| Number of connectors: | 3 |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Screw length below head [mm]: | 435 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less

