Search by vehicle
Search by KBA
Search by engine
RENAULT TRUCKS MIDLINER S150.08A
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
RENAULT TRUCKS MIDLINER S150.08A
Choose a car by KBA.
RENAULT TRUCKS MIDLINER S150.08A
Choose an engine.
View search
Hide search
Spare parts RENAULT TRUCKS MIDLINER S150.08A
General information
| Code: | FE103240 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | RENAULT |
Criteria
| Width [mm]: | 11 mm |
| Inner Diameter [mm]: | 80 mm |
| Outer Diameter [mm]: | 100 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Fitting Position: | frontal sided |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE10576 |
| Brand: | FEBI BILSTEIN |
| Title: | Pump, fuel pre-supply |
| Car: | MERCEDES |
Criteria
| New version: | yes |
| Length [mm]: | 79 mm |
| External Thread Size: | M16 x 1,5 |
| External Thread Size: | M22 x 1,5 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE108859 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | RENAULT |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 176 mm |
| Outer Diameter [mm]: | 108 mm |
| Internal Thread Size: | 1 1/8" - 16 UNF |
| Gasket inside diameter [mm]: | 92,5 mm |
| Gasket outside diameter [mm]: | 101,5 mm |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE109558 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, valve stem |
| Car: | RENAULT |
Criteria
| Height [mm]: | 10,8 mm |
| Outer Diameter 1 [mm]: | 17,5 mm |
| Outer Diameter 2 [mm]: | 16,5 mm |
| Material: | FKM (fluorocarbon rubber) |
| Valve Type: | for exhaust valves |
| Valve Type: | for inlet valves |
| Valve Stem Diameter [mm]: | 10 mm |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE178850 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | NISSAN |
Criteria
| Length [mm]: | 16 mm |
| Outer Diameter [mm]: | 22 mm |
| External Thread Size: | M16 x 1,5 |
| Thread Length [mm]: | 12 mm |
| Spanner Size: | 8 |
| Bolt Head-/Nut Design: | Inner rectangle |
| Material: | Steel |
| Surface: | Zink-nickel coated |
| Screw length below head [mm]: | 12 mm |
| For OE number: | 11128-00Q0B |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE178925 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | NISSAN |
Criteria
| Length [mm]: | 16 mm |
| Outer Diameter [mm]: | 22 mm |
| External Thread Size: | M16 x 1,5 |
| Thread Length [mm]: | 12 mm |
| Spanner Size: | 8 |
| Bolt Head-/Nut Design: | Inner rectangle |
| Material: | Steel |
| Surface: | Zink-nickel coated |
| Screw length below head [mm]: | 12 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194717 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MERCEDES |
Criteria
| Length [mm]: | 16 mm |
| Outer Diameter [mm]: | 22 mm |
| External Thread Size: | M16 x 1,5 |
| Thread Length [mm]: | 12 mm |
| Spanner Size: | 8 |
| Bolt Head-/Nut Design: | Inner rectangle |
| Material: | Steel |
| Surface: | Zink-nickel coated |
| Screw length below head [mm]: | 12 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| For OE number: | 470 998 56 00 S1 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE35144 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | RENAULT |
Criteria
| Thickness [mm]: | 12 mm |
| Inner Diameter [mm]: | 110 mm |
| Outer Diameter [mm]: | 130 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Fitting Position: | transmission sided |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE35367 |
| Brand: | FEBI BILSTEIN |
| Title: | Fuel Filter |
| Car: | SCANIA |
Criteria
| Filter type: | Spin-on Filter |
| Filter type: | without water drain screw |
| Housing material: | Metal |
| Height [mm]: | 123 mm |
| Outer Diameter [mm]: | 78 mm |
| Internal Thread Size: | M16 x 1,5 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE45951 |
| Brand: | FEBI BILSTEIN |
| Title: | Valve, injection system |
| Car: | RENAULT |
Criteria
| External Thread Size: | M16 x 1,5 |
| Spanner Size: | 22 |
| Valve Type: | Pressure Limiting Valve |
| Opening Pressure [bar]: | 2,7 bar |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less