Search by vehicle
Search by KBA
Search by engine
RENAULT TRUCKS MIDLINER S150.07A
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
RENAULT TRUCKS MIDLINER S150.07A
Choose a car by KBA.
RENAULT TRUCKS MIDLINER S150.07A
Choose an engine.
View search
Hide search
Spare parts RENAULT TRUCKS MIDLINER S150.07A 110 kW
General information
| Code: | 152071760791 |
| Brand: | MAGNETI MARELLI |
| Title: | Fuel Filter |
| Car: | AUDI |
Criteria
| Height [mm]: | 70 mm |
| Fuel Type: | Diesel |
| Filter type: | Filter Insert |
| Inner Diameter [mm]: | 19 mm |
| Outer Diameter [mm]: | 87 mm |
Show all
Show less
General information
| Code: | FE02954 |
| Brand: | FEBI BILSTEIN |
| Title: | Tie Rod End |
| Tag: | ProKit |
| Car: | MERCEDES |
Criteria
| Length [mm]: | 120 mm |
| Outer Diameter [mm]: | 27 mm |
| Outer Diameter [mm]: | 70 mm |
| External Thread Size: | M24 x 1,5 |
| External Thread Size: | M30 x 1,5 RHT |
| Thread Length [mm]: | 85 mm |
| Spanner Size: | 36 |
| Thread Type: | with right-hand thread |
| Cone Size [mm]: | 30 mm |
| Colour: | grey |
| Material: | Steel |
| Rod/Strut: | Guide Rod |
| Fitting Position: | Rear Axle Left |
| Fitting Position: | Front Axle Left |
| Fitting Position: | Front Axle Right |
| Fitting Position: | Rear Axle Right |
| Pipe Diameter [mm]: | 40 mm |
| Supplementary Article/Supplementary Info: | with crown nut and split pin |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE1001509 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | RENAULT |
Criteria
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE103240 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | RENAULT |
Criteria
| Width [mm]: | 11 mm |
| Inner Diameter [mm]: | 80 mm |
| Outer Diameter [mm]: | 100 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Fitting Position: | frontal sided |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE10576 |
| Brand: | FEBI BILSTEIN |
| Title: | Pump, fuel pre-supply |
| Car: | MERCEDES |
Criteria
| New version: | yes |
| Length [mm]: | 79 mm |
| External Thread Size: | M16 x 1,5 |
| External Thread Size: | M22 x 1,5 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE106153 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, oil pressure |
| Car: | RENAULT |
Criteria
| Number of connectors: | 2 |
| For OE number: | 50 10 311 026 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE108859 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | RENAULT |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 176 mm |
| Outer Diameter [mm]: | 108 mm |
| Internal Thread Size: | 1 1/8" - 16 UNF |
| Gasket inside diameter [mm]: | 92,5 mm |
| Gasket outside diameter [mm]: | 101,5 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE109558 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, valve stem |
| Car: | RENAULT |
Criteria
| Height [mm]: | 10,8 mm |
| Outer Diameter 1 [mm]: | 17,5 mm |
| Outer Diameter 2 [mm]: | 16,5 mm |
| Material: | FKM (fluorocarbon rubber) |
| Valve Type: | for exhaust valves |
| Valve Type: | for inlet valves |
| Valve Stem Diameter [mm]: | 10 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE178850 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | NISSAN |
Criteria
| Length [mm]: | 16 mm |
| Outer Diameter [mm]: | 22 mm |
| External Thread Size: | M16 x 1,5 |
| Thread Length [mm]: | 12 mm |
| Spanner Size: | 8 |
| Bolt Head-/Nut Design: | Inner rectangle |
| Material: | Steel |
| Surface: | Zink-nickel coated |
| Screw length below head [mm]: | 12 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| For OE number: | 11128-00Q0B |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE178925 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | NISSAN |
Criteria
| Length [mm]: | 16 mm |
| Outer Diameter [mm]: | 22 mm |
| External Thread Size: | M16 x 1,5 |
| Thread Length [mm]: | 12 mm |
| Spanner Size: | 8 |
| Bolt Head-/Nut Design: | Inner rectangle |
| Material: | Steel |
| Surface: | Zink-nickel coated |
| Screw length below head [mm]: | 12 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less