Search by vehicle
Search by KBA
Search by engine
RENAULT TRUCKS MIDLINER S120.09B BOM
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
RENAULT TRUCKS MIDLINER S120.09B BOM
Choose a car by KBA.
RENAULT TRUCKS MIDLINER S120.09B BOM
Choose an engine.
View search
Hide search
Spare parts RENAULT TRUCKS MIDLINER S120.09B BOM 88 kW
General information
| Code: | FE02954 |
| Brand: | FEBI BILSTEIN |
| Title: | Tie Rod End |
| Tag: | ProKit |
| Car: | MERCEDES |
Criteria
| Length [mm]: | 120 mm |
| Outer Diameter [mm]: | 27 mm |
| Outer Diameter [mm]: | 70 mm |
| External Thread Size: | M24 x 1,5 |
| External Thread Size: | M30 x 1,5 RHT |
| Thread Length [mm]: | 85 mm |
| Spanner Size: | 36 |
| Thread Type: | with right-hand thread |
| Cone Size [mm]: | 30 mm |
| Colour: | grey |
| Material: | Steel |
| Rod/Strut: | Guide Rod |
| Fitting Position: | Rear Axle Left |
| Fitting Position: | Front Axle Left |
| Fitting Position: | Front Axle Right |
| Fitting Position: | Rear Axle Right |
| Pipe Diameter [mm]: | 40 mm |
| Supplementary Article/Supplementary Info: | with crown nut and split pin |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE09841 |
| Brand: | FEBI BILSTEIN |
| Title: | Pilot Bearing, clutch |
| Car: | SCANIA |
Criteria
| Thickness [mm]: | 15 mm |
| Inner Diameter [mm]: | 25 mm |
| Outer Diameter [mm]: | 52 mm |
| Bearing Type: | Grooved Ball Bearing |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE1001509 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | RENAULT |
Criteria
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE106153 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, oil pressure |
| Car: | RENAULT |
Criteria
| Number of connectors: | 2 |
| For OE number: | 50 10 311 026 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE11246 |
| Brand: | FEBI BILSTEIN |
| Title: | Valve, injection system |
| Car: | MAN |
Criteria
| Voltage [V]: | 24 V |
| Valve Type: | Shut-Off Valve |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE178850 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | NISSAN |
Criteria
| Length [mm]: | 16 mm |
| Outer Diameter [mm]: | 22 mm |
| External Thread Size: | M16 x 1,5 |
| Thread Length [mm]: | 12 mm |
| Spanner Size: | 8 |
| Bolt Head-/Nut Design: | Inner rectangle |
| Material: | Steel |
| Surface: | Zink-nickel coated |
| Screw length below head [mm]: | 12 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| For OE number: | 11128-00Q0B |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE178925 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | NISSAN |
Criteria
| Length [mm]: | 16 mm |
| Outer Diameter [mm]: | 22 mm |
| External Thread Size: | M16 x 1,5 |
| Thread Length [mm]: | 12 mm |
| Spanner Size: | 8 |
| Bolt Head-/Nut Design: | Inner rectangle |
| Material: | Steel |
| Surface: | Zink-nickel coated |
| Screw length below head [mm]: | 12 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE192142 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting Kit, charger |
| Car: | IVECO |
Criteria
| For OE number: | 4632 123 S2 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194717 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MERCEDES |
Criteria
| Length [mm]: | 16 mm |
| Outer Diameter [mm]: | 22 mm |
| External Thread Size: | M16 x 1,5 |
| Thread Length [mm]: | 12 mm |
| Spanner Size: | 8 |
| Bolt Head-/Nut Design: | Inner rectangle |
| Material: | Steel |
| Surface: | Zink-nickel coated |
| Screw length below head [mm]: | 12 mm |
| For OE number: | 470 998 56 00 S1 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE45565 |
| Brand: | FEBI BILSTEIN |
| Title: | Slave Cylinder, engine brake |
| Car: | RENAULT |
Criteria
| Length [mm]: | 169 mm |
| Internal Thread Size: | M10 x 1 |
| External Thread Size: | M8 x 1,25 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less