MAN TGA 26.440
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAN TGA 26.440
Choose a car by KBA.
MAN TGA 26.440
Choose an engine.
Sealing ring MAN TGA 26.440 321 kW
K MOTORSHOP offers our customers a comprehensive portfolio of SEALING RING for MAN TGA 26.440 321 kW. K MOTORSHOP is one of the top suppliers and a much sought-after engine parts specialist on the world stage, specializing in mostly European and Asian passenger vehicles of all brands and models. If you are looking for a SEALING RING for a MAN TGA 26.440 321 kW, we've got you covered. If you're having trouble locating the part we'd be happy to help. Contact us here.
| Inner Diameter [mm]: | 100 mm |
| Outer Diameter [mm]: | 130 mm |
| Height [mm]: | 12 mm |
| Radial Shaft Seal Design: | AW/BS |
| Swirl Type: | Right-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 4 pcs |
| Inner Diameter [mm]: | 115 mm |
| Outer Diameter [mm]: | 140 mm |
| Height [mm]: | 12 mm |
| Radial Shaft Seal Design: | AW/BS |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Observe assembly information: | yes |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 3 pcs |
| Inner Diameter [mm]: | 120 mm |
| Outer Diameter [mm]: | 140 mm |
| Height [mm]: | 13 mm |
| Radial Shaft Seal Design: | AW/BS |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| Additionally required article (article number): | 834.289 |
| Observe assembly information: | yes |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 3 pcs |
| Width [mm]: | 13 mm |
| Inner Diameter [mm]: | 120 mm |
| Outer Diameter [mm]: | 140 mm |
| Material: | ACM (Polyacrylate) |
| Material: | PTFE (polytetrafluoroethylene) |
| Fitting Position: | transmission sided |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
| Thickness [mm]: | 12 mm |
| Inner Diameter [mm]: | 100 mm |
| Outer Diameter [mm]: | 130 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Material: | ACM (Polyacrylate) |
| Supplementary Article/Supplementary Info: | with sealing lip |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Fitting Position: | frontal sided |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
| Thickness [mm]: | 12 mm |
| Inner Diameter [mm]: | 115 mm |
| Outer Diameter [mm]: | 140 mm |
| Material: | ACM (Polyacrylate) |
| Material: | PTFE (polytetrafluoroethylene) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Fitting Position: | frontal sided |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
| Thickness [mm]: | 8 mm |
| Inner Diameter [mm]: | 55 mm |
| Outer Diameter [mm]: | 70 mm |
| Material: | ACM (Polyacrylate) |
| Material: | PTFE (polytetrafluoroethylene) |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
| Inner Diameter [mm]: | 60,8 mm |
| Outer Diameter [mm]: | 67 mm |
| Thickness [mm]: | 6 mm |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Shape: | slotted |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
| Inner Diameter [mm]: | 120 mm |
| Outer Diameter [mm]: | 140 mm |
| Height [mm]: | 13 mm |
| Radial Shaft Seal Design: | AW/BS |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover: | with dust lip |
| For components see parts list: | yes |
| Observe assembly information: | yes |
| Installation Information: | Mounting dry and without any additional oil and grease |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
| Inner Diameter [mm]: | 95 mm |
| Outer Diameter [mm]: | 120 mm |
| Height [mm]: | 12 mm |
| Height 2 [mm]: | 17 mm |
| Radial Shaft Seal Design: | A/BS2 |
| Material: | FPM (fluoride rubber) |
| Dust Cover: | with dust lip |
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
| Material: | PTFE (polytetrafluoroethylene) |
| Material: | ACM (Polyacrylate) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Inner Diameter [mm]: | 120 mm |
| Outer Diameter [mm]: | 140 mm |
| Height [mm]: | 13 mm |
| Radial Shaft Seal Design: | AB SL |
| Swirl Type: | Left-hand Twist |
| Material: | PTFE (polytetrafluoroethylene) |
| Inner Diameter [mm]: | 100 mm |
| Outer Diameter [mm]: | 130 mm |
| Height [mm]: | 12 mm |
| Radial Shaft Seal Design: | AB |
| Swirl Type: | Right-hand Twist |

