Search by vehicle
Search by KBA
Search by engine
LANDINI Series 5 5-110D
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
LANDINI Series 5 5-110D
Choose a car by KBA.
LANDINI Series 5 5-110D
Choose an engine.
View search
Hide search
Spare parts LANDINI Series 5 5-110D
General information
| Code: | 187.010 |
| Brand: | ELRING |
| Title: | Shaft Seal, wheel hub |
| Car: | FORD |
Criteria
| Inner Diameter [mm]: | 165 mm |
| Outer Diameter [mm]: | 190 mm |
| Height [mm]: | 16,5 mm |
| Radial Shaft Seal Design: | KS |
| Material: | NBR (nitrile butadiene rubber) |
Show all
Show less
Netto price:
USD $62.05
(USD $62.05 without VAT 0%)
Your price:
-25%
USD $46.54
(USD $46.54 without VAT 0%)
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | MG223 |
| Brand: | MAHLE |
| Title: | Alternator |
| Car: | Case-IH Farmall Claas Talos Landini Manitou McCormick New Holland Perkins 854E-E34TA 1104-44TA TCD3.6 |
Criteria
| Voltage [V]: | 14 V |
| Alternator Charging Current [A]: | 120 A |
| Pulleys: | with V-ribbed belt pulley |
| Rotation Direction: | Clockwise rotation |
| Bore Diameter [mm]: | 10,2 mm |
| Distance of mounting bores [mm]: | 82,0 mm |
| Mounting points diameter [mm]: | 86,0 mm |
| Distance from belt pulley to alternator [mm]: | 37,1 mm |
| Number of ribs: | 8 |
| Belt Pulley Ø [mm]: | 55 mm |
| Alternator Type: | with coil control |
| Mounting Angle [degrees]: | 60,0 ° |
| Connector/Clamp: | W |
| Dust Cover: | with dust cover |
| Packaging height [cm]: | 17,50 cm |
| Packaging width [cm]: | 18,60 cm |
| Packaging length [cm]: | 24,8 cm |
| Net Weight [g]: | 5420 g |
Show all
Show less
Netto price:
USD $449.33
(USD $449.33 without VAT 0%)
Your price:
-30%
USD $314.53
(USD $314.53 without VAT 0%)
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |
General information
| Code: | MS222 |
| Brand: | MAHLE |
| Title: | Starter |
Criteria
| Voltage [V]: | 12 V |
| Rated Power [kW]: | 3,2 kW |
| Number of Teeth: | 10 |
| Flange Diameter [mm]: | 89,0 mm |
| Mounting Angle [degrees]: | 135,0 ° |
| Number of mounting bores: | 3 |
| Mounting points diameter [mm]: | 127,0 mm |
| Bore Diameter 1 [mm]: | 10,9 mm |
| Rotation Direction: | Clockwise rotation |
| For flywheel depth [mm]: | 32,5 mm |
| Tooth Pitch [mm]: | 15,42 mm |
| Clamp: | 31 |
| Transmission Type: | with reduction gear |
| Packaging height [cm]: | 14,50 cm |
| Packaging width [cm]: | 21,50 cm |
| Packaging length [cm]: | 38,2 cm |
| Net Weight [g]: | 8400 g |
Show all
Show less
Netto price:
USD $378.00
(USD $378.00 without VAT 0%)
Your price:
-30%
USD $264.60
(USD $264.60 without VAT 0%)
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |