Piston with rings and pin - PM005800 ET ENGINETEAM - 9C1Q-6110-EAA, 9C1Q6110EAA, 41252600
Car: Ford Duratorq 2,2TDCi 2006+Weight : | 0,98 kg |
Cylinder Bore [mm]: | 86 mm |
Standard Size [STD]: | yes |
Compression Height [mm]: | 48,42 mm |
Recess Depth 1 [mm]: | 15,85 mm |
Recess Diameter [mm]: | 46,9 mm |
Bolt Head Diameter [mm]: | 30 mm |
Bolt Length [mm]: | 66 mm |
Supplementary Article/Info 2: | with piston ring carrier |
Supplementary Article/Info 2: | with cooling duct |
Supplementary Article/Info 2: | for keystone connecting rod |
Machined: | with cut-out for oil jet |
Supplementary Article/Supplementary Info: | with piston rings |
Warehouse: | > 25 pcs |
EAN: 8592779018895
Complete mechanically machined piston ET Engineteam brand with cut-out for oil jet. Standard size for cylinders with bore 86 mm. Including piston rings: 2 mm, 2 mm and 2 mm. With piston ring carrier for connecting rod. Piston compression height 48,42, bolt length 66 mm, bolt diameter 30 mm. Recess diameter 46,9 mm, recess depth 15,85 mm. For connecting rod OM0034. Piston is also available in its oversize version: PM005850 (+ 0,5 mm). Suitable for Ford Transit 2,2 TDCi CYRB, PGFA, PGFB, UHFA, UHFB, UHFC engine types, made since 2006. OE numbers: BK2Q6105, 87-427700-50.
WARNING: For PUMA engines 2,2 HDi / TDCi there is number of different versions of almost identical pistons, which however are different in their compression heights (so they are for different connecting rods). It happens very often, that these pistons are wrongly purchased. It is crucial, to identify the pistons by their engine code, moreover by the exact piston measuring. If you are unsure, prepare your VIN code and contact us.
Products of Czech brand ET Engineteam can be found in all European engine parts catalogue TecDoc. Their quality is comparable to OE parts. ET Engineteam was founded in 2007. Today they are one of the biggest suppliers on the Czech market and the company supplies abroad as well. Products of the company ET Engineteam are complying with the highest standards on the market.
Articles
-
Piston versions for Fiat Ducato, Ford Transit, Citroen Jumper, Peugeot Boxer 2,2 HDi / TDCi
Various PUMA engines have pistons with different compression height of either 48.42 mm or 43.42 mm. Adequately different connecting rods with 112 mm or 117 mm length are intended for these pistons. We also have connecting rods in practical sets of 4 pieces and in sets with a crankshaft and bearings. We therefore recommend that you check the engine code before ordering, or prepare a VIN code and ...
Documents
Used in
-
FORD
-
FORD CYRA
92 kW / 125 HP 2198 ccm 4 cylinders 16 valves Diesel
-
FORD CYRB
92 kW / 125 HP 2198 ccm 4 cylinders 16 valves Diesel
-
FORD PGFA
103 kW / 140 HP 2198 ccm 4 cylinders 16 valves Diesel
-
FORD PGFB
103 kW / 140 HP 2198 ccm 4 cylinders 16 valves Diesel
-
FORD UHFA
103 kW / 140 HP 2198 ccm 4 cylinders 16 valves Diesel
-
FORD UHFB
103 kW / 140 HP 2198 ccm 4 cylinders 16 valves Diesel
-
FORD UHFC
103 kW / 140 HP 2198 ccm 4 cylinders 16 valves Diesel
-
FORD CYRA
Reference Numbers
Alternatives
General information
Code: | 41252600 |
Brand: | KOLBENSCHMIDT |
Title: | Piston with rings and pin |
Car: | Citroën Jumper Fiat Ducato Ford Transit Land Rover Defender Peugeot Boxer 2,2TDCi 4HU 4HV P22DTE CYF5 CYRA CYRB CYRC SRFA SRFB SRFC SRFD SRFE UHFA UHFB UHFC 2007+ |
Weight : | 0,94 kg |
Criteria
Production Number: | 086218 |
Cylinder Bore [mm]: | 86 mm |
Piston Clearance [mm]: | 0,06 mm |
Compression Height [mm]: | 48,42 mm |
Length [mm]: | 74,8 mm |
Recess Depth 1 [mm]: | 15,8 mm |
Recess Diameter [mm]: | 46,9 mm |
Component Number: | 63266 |
Component Number: | 65891 |
Component Number: | 65893 |
Standard Size [STD]: | yes |
Bolt Head Diameter [mm]: | 30 mm |
Bolt Length [mm]: | 66,85 mm |
Connecting Rod Design: | Trapezoidal Connecting Rod |
General information
Code: | 87-427700-40 |
Brand: | NÜRAL |
Title: | Piston with rings and pin |
Car: | FORD |
Weight : | 0,98 kg |
Criteria
Height [mm]: | 74,8 mm |
Cylinder Bore [mm]: | 86 mm |
Machined: | with cut-out for oil jet |
Bolt Head Diameter [mm]: | 30 mm |
Supplementary Article/Info 2: | with cooling duct |
Supplementary Article/Info 2: | with piston ring carrier |
Supplementary Article/Info 2: | for keystone connecting rod |
Component Number: | 08-427700-00 |
Production Number: | 08683-101 |
Compression Height [mm]: | 48,42 mm |
Recess Diameter [mm]: | 46,9 mm |
Bolt Length [mm]: | 66 mm |
Recess Depth 1 [mm]: | 15,85 mm |
Standard Size [STD]: | yes |
Piston Clearance [mm]: | 0,06 mm |
Technical Information: | *** CAUTION - CHECK BOWL DIAMETER *** ke man |