|
Brand: NON OE |
Code: 03D906433 |
Title: Other electric parts
Other electric parts - 03D906433 NON OE
Car: ŠKODA-VW
Unfortunately, there is no additional description available for this product.
Categories
Alternatives
General information
| Code: | 064848226010 |
| Brand: | MAGNETI MARELLI |
| Title: | Sensor, crankshaft pulse |
| Car: | ŠKODA-VW |
| Weight : | 0,00 kg |
General information
| Code: | 0986280726 |
| Brand: | BOSCH |
| Title: | Sensor, crankshaft pulse |
| Car: | ŠKODA-VW |
| Weight : | 0,06 kg |
General information
| Code: | HOF7517382 |
| Brand: | HOFFER |
| Title: | Sensor, crankshaft pulse |
| Car: | ŠKODA-VW |
| Weight : | 0,05 kg |
Criteria
| Number of pins: | 3 -pin connector |
| Connector Shape: | D Shape |
| Supplementary Article/Info 2: | without cable |
| Sensor Type: | Hall Sensor |
General information
| Code: | HOF7517382E |
| Brand: | HOFFER |
| Title: | Sensor, crankshaft pulse |
| Car: | ŠKODA-VW |
| Weight : | 0,05 kg |
Criteria
| Number of pins: | 3 -pin connector |
| Connector Shape: | D Shape |
| Supplementary Article/Info 2: | without cable |
| Sensor Type: | Hall Sensor |
| Quality: | OE EQUIVALENT |
General information
| Code: | V10-72-1043 |
| Brand: | VEMO |
| Title: | Sensor, crankshaft pulse |
| Car: | ŠKODA-VW |
| Weight : | 0,00 kg |
Criteria
| Length [mm]: | 90 mm |
| Colour: | black |
| Supplementary Article/Info 2: | without cable |
| Supplementary Article/Info 2: | for crankshaft |
| Required quantity: | 1 |
| Sensor Type: | Hall Sensor |
| Number of pins: | 3 -pin connector |
| Number of connectors: | 3 |
| Rated Voltage [V]: | 12 V |
| Fitting Depth [mm]: | 20,2 mm |
| Connector Shape: | D Shape |
| Weight [kg]: | 0,034 kg |
| General Information: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
| General Information: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Show all
Show less