|
Brand: KOLBENSCHMIDT |
Code: 40734600 |
Title: Piston with rings and pin
Piston with rings and pin - 40734600 KOLBENSCHMIDT - 0308800, 87-501500-40, 074107065R
Car: Volkswagen LT28-35/LT28-46 2,5TDi AVR/BBR 05.1999→07.2006
| Weight : | 0,86 kg |
| Production Number: | 081176 |
| Cylinder Bore [mm]: | 81,01 mm |
| Compression Height [mm]: | 45,75 mm |
| Length [mm]: | 69,75 mm |
| Recess Depth 1 [mm]: | 16,8 mm |
| Valve pocket depth 1 [mm]: | 1,35 mm |
| Recess Diameter [mm]: | 46 mm |
| Component Number: | 63504 |
| Component Number: | 63507 |
| Component Number: | 63745 |
| Standard Size [STD]: | yes |
| Bolt Ø [mm]: | 26 mm |
| Bolt length [mm]: | 68 mm |
Unfortunately, there is no additional description available for this product.
Used in
Reference Numbers
Alternatives
General information
| Code: | 0308800 |
| Brand: | MAHLE |
| Title: | Piston with rings and pin |
| Car: | VW |
| Weight : | 0,90 kg |
Criteria
| Standard Size [STD]: | yes |
| Cylinder Bore [mm]: | 81,01 mm |
| Length [mm]: | 69,7 mm |
| Compression Height [mm]: | 45,75 mm |
| Bolt length [mm]: | 68,0 mm |
| Bolt Ø [mm]: | 26,0 mm |
| Recess Depth 1 [mm]: | 16,8 mm |
| Recess Diameter [mm]: | 46,0 mm |
| Valve pocket depth 1 [mm]: | 1,3 mm |
| Machined: | with cut-out for oil jet |
| Surface: | Coated |
| Supplementary Article/Info 2: | with piston ring carrier |
| Supplementary Article/Info 2: | without cooling duct |
| Top land height [mm]: | 9 mm |
| Production Number: | 81 L 51 |
| Piston Clearance [mm]: | 0,05 mm |
| Component Number: | 1. R2.5 IW CrK |
| Component Number: | 2. M 2.0 IFU P |
| Component Number: | 3. DSF 3.0 Cr |
| Packaging height [cm]: | 12,80 cm |
| Net Weight [g]: | 795 g |
| Packaging length [cm]: | 9,5 cm |
| Packaging width [cm]: | 9,50 cm |
Show all
Show less
Netto price:
$136.14
($136.14 without VAT 0%)
Your price:
-30%
$95.30
($95.30 without VAT 0%)
| Warehouse: | 0 pcs | |
| Supplier: | Check |
General information
| Code: | 87-501500-40 |
| Brand: | NÜRAL |
| Title: | Piston with rings and pin |
| Car: | VW |
| Weight : | 0,00 kg |
Criteria
| Height [mm]: | 69,8 mm |
| Cylinder Bore [mm]: | 81 mm |
| Machined: | with cut-out for oil jet |
| Bolt Ø [mm]: | 26 mm |
| Supplementary Article/Info 2: | with bush for piston pin boss |
| Supplementary Article/Info 2: | with piston ring carrier |
| Component Number: | 08-501500-00 |
| Compression Height [mm]: | 45,8 mm |
| Recess Diameter [mm]: | 46 mm |
| Bolt length [mm]: | 68 mm |
| Recess Depth 1 [mm]: | 16,8 mm |
| Valve pocket depth 1 [mm]: | 1,35 mm |
| Valve pocket depth 2 [mm]: | 1,35 mm |
| Standard Size [STD]: | yes |
Show all
Show less